We provide you three versions of our real exam dumps:
1.The PDF Version: If you are used to reading and writing questions and answers on paper, you can choose the dumps vce pdf files of D-PE-OE-01 real exam questions and D-PE-OE-01 test dumps vce pdf. It is available for reading on-line and printing out for practice.
2.The Software Version: If you are used to study on windows computer, you can choose the software version of D-PE-OE-01 real exam questions and D-PE-OE-01 test dumps vce pdf. It is interactive and functional. It reminds you good study methods and easy memorization. If you make mistakes after finishing the real exam dumps the software will remember your mistakes and notice you practice many times.
3.The On-line Version: Its functions are the same with software version. The difference is that the on-line version of D-PE-OE-01 real exam questions and D-PE-OE-01 test dumps vce pdf is used on downloading into all operate system computers, mobile phone and others. The software is only available in windows PC computer. You can read, write and recite at any time and any places if you want. Studying is easy and interesting.
Sometimes we know from our customers that their friends or colleagues give up exams in despair as they fail exams several times. We feel sorry to hear that and really want to help them with our D-PE-OE-01 real exam questions and D-PE-OE-01 test dumps vce pdf (Dell PowerEdge Operate v2 Exam). But they refuse to attend the exam again. Choices are more important than efforts.
Do you still have a terrible headache about upcoming D-PE-OE-01? Let our D-PE-OE-01 real exam questions and D-PE-OE-01 test dumps vce pdf help you pass exam easily. Don't worry! Just 1-2 days' preparation before real test, easily pass D-PE-OE-01 exam! Can you believe it? Leave it to the professional!
We Real4dumps helped more 5800 candidates pass D-PE-OE-01 exam since the year of 2009. All of real exam dumps experts have more than 10 years' working experience who worked for the international large companies such as Cisco, Microsoft, SAP, Oracle and so on. Based on past data our passing rate for D-PE-OE-01 exam is high to 99.52% with our real exam questions and test dumps vce pdf.
Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)
We not only provide you the best D-PE-OE-01 real exam questions and D-PE-OE-01 test dumps vce pdf but also good service.
1.Our customer service is 7/24 on-line. Whenever you have any questions we will be pleased to solve for you or help you in the first time.
2.As of the date of purchasing we provide you one-year service warranty. Our IT department colleagues check update information every day. When D-PE-OE-01 real exam dumps update we will send you the download emails for your reference. If you pass exam you can share with your friends or colleagues.
3.We promise to keep your information in secret and safe. We have a strict information protection system so you should not worry about this. Also we won't send advertisement emails to you too.
4.We guarantee 100% pass D-PE-OE-01 exam (Dell PowerEdge Operate v2 Exam). If you fail the exam we will refund you the full dumps costs. You send the failure score certification to our support email. Once confirmed we will refund you two days except of official holidays.
5.We provide real exam dumps discounts for old customers and long-term cooperation companies. If you have interest please contact with us.
In the end, if you still have any other doubt about our D-PE-OE-01 real exam questions and D-PE-OE-01 test dumps vce pdf please contact with us we will reply you ASAP. Our team will serve for you at our heart and soul. We are the best. Trust me. Choosing us will be helpful for your exams. Come on! 100% pass exam.
EMC D-PE-OE-01 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Server Monitoring | 15% | - Performance monitoring
|
| Troubleshooting | 22% | - Problem diagnosis methodology
|
| Server Maintenance | 23% | - Hardware component configuration
|
| System Administration | 15% | - Operating system installation
|
| Server Management | 25% | - Management tools usage
|
EMC Dell PowerEdge Operate v2 Sample Questions:
A system engineer tried to remotely update the firmware of the PSUs on a PowerEdge 15G server, but the update failed.
An error message is received:
- PSU0006: Power supply X is incorrectly configured
What is the reason for the failure?
- A. The firmware is incompatible.
- B. A mixed PSU configuration exists.
- C. PSUs are connected to different voltages.
- D. The server has only one PSU.
Correct Answer: B 🗳️
A technician needs to install a server with a PERC RAID controller and 24, 2.5" SAS SED drives.
The installation requires the following items to be created:
- Three equal-sized virtual disks
- Encrypted virtual disks
- A global hot spare
In addition to selecting the physical drive to be the hot spare disk, what tasks should the technician perform to set up the RAID controller?
- A. Access the iDRAC GUI and create the three virtual disks, Select each virtual disk and enable encryption
- B. Boot to Ctrl+R and create the three virtual disks, Select each physical drive and enable encryption
- C. Boot to F12 and create the three virtual disks, Select each virtual disk and enable encryption
- D. Boot to F12 and create the three virtual disks, Select each physical drive and enable encryption
Correct Answer: A 🗳️
SIMULATION
A system administrator is asked to create an iDRAC shared management port using LOM2 and create a failover network using LOM3.
Use the simulator to accomplish this task.
Correct Answer:
Answer in Explanation
Explanation:
To configure an iDRAC shared management port with LOM2 and set up a failover network using LOM3 in the iDRAC interface, follow these steps:
Step-by-Step Guide:
Access iDRAC Network Settings:
In the iDRAC interface, navigate to the iDRAC Settings tab in the top menu bar. Select Network from the dropdown options to access network configuration settings. Configure the Shared Management Port:
In the Network settings, locate the section for Network Interface or LAN Interface Configuration. Change the NIC Selection to Shared. This will enable the use of a LAN on Motherboard (LOM) port for iDRAC management.
Select LOM2 for the Shared Management Port:
Once you've selected Shared, additional options should appear for selecting the specific port. Choose LOM2 as the Shared Management Port. This configures iDRAC to use LOM2 for its primary network connection.
Enable Failover and Select LOM3:
Look for the Failover settings within the same Network Interface configuration.
Enable Failover and select LOM3 as the failover network port. This configuration allows iDRAC to switch to LOM3 automatically if there is an issue with the connection on LOM2.
Save and Apply Settings:
Once you have configured the shared management port and failover settings, click Apply or Save to confirm the configuration.
The iDRAC interface may briefly refresh, and you should receive a confirmation that the settings have been applied successfully.
Verify Configuration:
After the settings are saved, you can verify that LOM2 is listed as the shared management port and that LOM3 is set as the failover port under Network settings.
By following these steps in the simulator, you should be able to configure iDRAC to use LOM2 for the shared management port and set up a failover network with LOM3. Make sure to save your changes to apply the configuration.
A technician replaces a failed power supply unit (PSU) on a server. The LED on the new PSU blinks green and turns off.
What is the state of the new PSU?
- A. Defective
- B. Successfully added and in standby mode
- C. Mismatched
- D. Successfully added and functional
Correct Answer: C 🗳️
A server has 12x 32 GB RDIMMS installed with two CPUs. A technician has been called because the OS is seeing only 192 GB of memory instead of the full 384 GB. The server appears to be operating correctly and is displaying no errors on the LCD plus has no error entries in the logs relating to memory.
What should the technician do to resolve this issue?
- A. Switch the Memory Mode to Memory Mirroring
- B. Update the memory controller firmware
- C. Switch the Memory Mode to Optimized
- D. Replace CPU2
Correct Answer: C 🗳️
Viewing page 1 out of 84 pages.
Viewing questions 1-5 out of 420 questions.
