New 2026 Realistic Free CheckPoint 156-590 Exam Dump Questions and Answer
156-590 Practice Test Engine: Try These 102 Exam Questions
NEW QUESTION # 11
Task: Configure protections against known CVEs.
Answer:
Explanation:
See the Explanation.Explanation:
1- Filter IPS Protections by CVE number (e.g., CVE-2023-XXXX).
2- Confirm CVE protection is available and enabled.
3- Set action to "Prevent."
4- Link it to custom profile.
5- Test and validate using test exploit traffic or logs.
NEW QUESTION # 12
Task: Enable Threat Prevention blades including IPS on a Security Gateway via SmartConsole.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open SmartConsole > Gateways & Servers.
2- Double-click your Security Gateway.
3- Go to the "General Properties" tab.
4- Check "IPS", "Anti-Bot", and "Anti-Virus".
5- Click OK, publish changes, then install the policy.
NEW QUESTION # 13
Task: Configure specific scan settings in Anti-Virus for a performance-sensitive profile.
Answer:
Explanation:
See the Explanation.Explanation:
1- Clone the base profile > name it Performance_AV_Profile.
2- Under Anti-Virus, choose Stream Mode scanning.
3- Disable scanning for large file types (e.g., media).
4- Set threshold limits (e.g., max file size).
5- Apply this profile to critical servers or high-traffic rules.
NEW QUESTION # 14
Task: Test Anti-Bot enforcement using a known malicious test domain.
Answer:
Explanation:
See the Explanation.Explanation:
1- Configure DNS to query a known test domain (e.g., simulating botnet activity).
2- Monitor Logs & Monitor for blade:"Anti-Bot".
3- Confirm "Prevented" action.
4- Review domain reputation in log entry.
5- Ensure the profile has high-confidence blocking enabled.
NEW QUESTION # 15
Task: Configure General Protections for all protocols.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open Threat Prevention > Profiles > Edit selected profile.
2- Navigate to General Protections tab.
3- Enable protections like "Protocol Anomaly" or "Malicious Mail Content."
4- Set actions to Prevent/Detect based on severity.
5- Save and assign the profile to your policy.
NEW QUESTION # 16
Task: Apply different IPS profiles based on network zone using policy layers.
Answer:
Explanation:
See the Explanation.Explanation:
1- Create multiple Threat Prevention profiles per zone (DMZ, Internal, External).
2- In Threat Prevention Policy, add separate rules by source zone.
3- Apply respective profile in each rule.
4- Publish and install the policy.
5- Monitor logs to verify zone-specific detection.
NEW QUESTION # 17
Task: Configure inspection settings to reduce performance impact on a busy gateway.
Answer:
Explanation:
See the Explanation.Explanation:
1- Navigate to Threat Prevention > Inspection Settings in SmartConsole.
2- Choose "Performance Optimization" tab.
3- Lower detection sensitivity or exclude internal trusted networks.
4- Save changes and apply policy to the relevant gateways.
5- Monitor logs for false negatives and adjust as needed.
NEW QUESTION # 18
Task: Verify IPS protections are being enforced.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open SmartConsole > Logs.
2- Filter: blade:"IPS" and action:"Prevented".
3- Confirm matching protections from the active profile.
4- View details: CVE, protocol, action, confidence level.
5- Export log details for auditing.
NEW QUESTION # 19
Task: Configure automatic IPS updates via SmartConsole.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open SmartConsole > Threat Prevention > Updates.
2- Enable "Check for updates automatically."
3- Set schedule (e.g., daily at 2:00 AM).
4- Enable "Install updates automatically" for production or testing only.
5- Click OK and publish changes.
NEW QUESTION # 20
Task: Test connection to Check Point Update Services.
Answer:
Explanation:
See the Explanation.Explanation:
1- SSH into Gateway.
2- Use: curl -v https://updates.checkpoint.com.
3- Validate certificate and connection success.
4- Check DNS resolution of update servers.
5- Use SmartConsole > Logs to monitor blocked connections if failed.
NEW QUESTION # 21
Task: Create a custom Threat Prevention profile named Corporate_TP_Strict in SmartConsole.
Answer:
Explanation:
See the Explanation.Explanation:
1- Go to Threat Prevention > Profiles.
2- Click "New Profile", name it Corporate_TP_Strict.
3- In the base profile, select Optimized as a starting point.
4- Enable IPS, Anti-Bot, Anti-Virus, Threat Emulation, and Threat Extraction.
5- Save the profile for later assignment to a policy rule.
NEW QUESTION # 22
Task: Assign the custom profile to a Threat Prevention policy rule.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open Threat Prevention > Policy.
2- Add a new rule or edit an existing one.
3- In the Profile column, select Corporate_TP_Strict.
4- Set Track to Log and Action to Accept.
5- Publish and install the Threat Prevention policy.
NEW QUESTION # 23
Task: Update Anti-Bot and Anti-Virus signatures manually.
Answer:
Explanation:
See the Explanation.Explanation:
1- SSH into the Gateway.
2- Run: avsu_client to trigger the signature update.
3- Monitor: /opt/CPsuite-R81/fw1/log/antivirus_update.elg.
4- On SmartConsole, go to Gateways > Threat Prevention tab to verify update timestamp.
5- Confirm new signatures are downloaded and applied.
NEW QUESTION # 24
Task: Enable Anti-Bot and Anti-Virus software blades on a Security Gateway.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open SmartConsole > Gateways & Servers.
2- Double-click the relevant Security Gateway.
3- Under the "General Properties" tab, enable "Anti-Bot" and "Anti-Virus."
4- Click OK > Publish the changes.
5- Install the Access Control and Threat Prevention policy.
NEW QUESTION # 25
Task: Enable DNS reputation protection under Anti-Bot in a custom profile.
Answer:
Explanation:
See the Explanation.Explanation:
1- Edit your custom Threat Prevention profile.
2- Under the Anti-Bot section, enable DNS Reputation.
3- Set to Prevent on High Confidence queries.
4- Ensure "Inspect DNS traffic" is enabled.
5- Save and apply the profile.
NEW QUESTION # 26
Task: Enable automatic email alerts for critical IPS events.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open SmartEvent or SmartConsole > Logs & Monitor.
2- Go to Automatic Reactions > New Reaction.
3- Set condition: blade=IPS AND severity=Critical.
4- Choose Action: Send Email > Configure recipient.
5- Save and test by generating a trigger.
NEW QUESTION # 27
Task: Disable Anti-Virus scanning temporarily for troubleshooting.
Answer:
Explanation:
See the Explanation.Explanation:
1- In SmartConsole > Gateway Properties > Threat Prevention.
2- Uncheck "Anti-Virus" blade temporarily.
3- Publish and install the policy.
4- Re-enable it post-testing following the same steps.
5- Confirm with cpstat antimalware.
NEW QUESTION # 28
Task: Configure specific protections for SMB protocol attacks.
Answer:
Explanation:
See the Explanation.Explanation:
1- In IPS Protections, filter by "Protocol: SMB."
2- Enable all protections related to SMB and set to "Prevent."
3- Add a tag: "Windows Server Protections."
4- Attach them to a custom profile.
5- Save and assign the profile in Threat Prevention policy.
NEW QUESTION # 29
Task: Disable high-performance impact protections temporarily during maintenance.
Answer:
Explanation:
See the Explanation.Explanation:
1- Go to IPS Protections.
2- Filter by "Performance Impact: Critical or High."
3- Select all > Action > Set to "Inactive" or "Detect."
4- Tag as "Temporarily Disabled."
5- Schedule to revert after maintenance.
NEW QUESTION # 30
Task: Use CLI to test connectivity with IPS update servers.
Answer:
Explanation:
See the Explanation.Explanation:
1- SSH into the Gateway.
2- Run: curl -v https://updates.checkpoint.com.
3- Confirm certificate and connection success.
4- Run ips update now for manual update.
5- Check /opt/CPsuite-R81/fw1/log/ips_update.elg for result.
NEW QUESTION # 31
Task: Customize Threat Prevention profile for web servers with fewer protections.
Answer:
Explanation:
See the Explanation.Explanation:
1- Clone an existing profile, name it Web_Servers_Profile.
2- Disable Anti-Bot (not applicable for outbound traffic).
3- Keep Anti-Virus and IPS with only essential protections enabled.
4- Set high-performance protections to "Detect" or "Inactive."
5- Apply the profile to traffic destined for web servers.
NEW QUESTION # 32
Task: Validate policy enforcement of a specific IPS profile.
Answer:
Explanation:
See the Explanation.Explanation:
1- Trigger test traffic that matches a rule using the profile.
2- SmartConsole > Logs > Filter by Profile name.
3- Confirm protections are applied with expected action.
4- Use fw stat on gateway to view loaded policy.
5- Ensure profile assignment is correct in the policy rule.
NEW QUESTION # 33
......
Guaranteed Success in CTPS 156-590 Exam Dumps: https://www.real4dumps.com/156-590_examcollection.html
CheckPoint 156-590 Daily Practice Exam New 2026 Updated 102 Questions: https://drive.google.com/open?id=11kV3PT-IILS4NiO8J2hbvtHcmCKZR_Op
