100% Pass Your 5V0-41.20 Exam Dumps at First Attempt with Real4dumps
Penetration testers simulate 5V0-41.20 exam PDF
How to book the VMware 5V0-41.20: VMware vSAN 6.7 Specialist Exam
These are following steps for registering the 5V0-41.20: VMware vSAN 6.7 Specialist exam.
- Step 1: Visit to VMware Exam Registration
- Step 2: Sign up/Login for a VMware account
- Step 3: Select local center based on your country, date, time and confirm with a payment method.
NEW QUESTION 18
Scenario 1:
A network administrator is tasked! with enabling SO-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites- One is an Internet-only site and two are Hybrid locations with both internet and MPLS: The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Exhibit.
An administrator is attempting to activate two Edge devices at the Chicago branch location. The local technician reports that the Edge devices are not coming online. The Edge devices have been plugged in, powered on, and connected to the correct circuits with an Enhanced HA setup.
What should the local technician check first when troubleshooting the issue?
- A. Review color of the LED.
- B. Verify the link light sequence of the HA ports.
- C. Review the Orchestrator for HA misconfiguration issues.
- D. Verify beep sequence of the Edge devices.
Answer: B
NEW QUESTION 19
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator is investigating connectivity issues between Chicago and San Jose. The administrator browses to the Overlay Flow Control (OFC) window and notices that the screen is blank with no routes shown in the OFC.
What is a possible reason for this?
- A. There is an invalid MTU configuration at Chicago.
- B. Cloud VPN for the Edges / Profiles is not enabled.
- C. OSPF or BGP is not enabled.
- D. The routing table on the Edges has not been initialized.
Answer: B
NEW QUESTION 20
Scenario 2:
After completing the branch activation activities for all required branches, the administrator attempts to test connectivity between the various branches and between the hubs and branches- The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
The tunnel from the Dallas site to the Seattle hub is not coming up.
What are two things that should be checked to determine the issue? (Choose two.)
- A. Dynamic Branch to Branch is not enabled.
- B. Hub WAN Interface might be behind a firewall.
- C. Spoke Edge and Hub Edge are two different Edge models.
- D. Spoke Edge and Hub Edge have a mismatched certificate.
Answer: C,D
NEW QUESTION 21
Scenario 1:
The Dallas Branch location is having issues getting activated. The local network administrator is aware that the Edge device received a DHCP address and was able to connect to the internet. The Orchestrator is reporting the Edge as Down. No other changes were made post activation.
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is am Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Refer to the Exhibit(s).
What is the cause of this issue?
- A. The Edge will be offline for about 4 hours until it has completed the factory image installation.
- B. The activation link contained incorrect configurations for WAN overlays and WAN interfaces.
- C. The activation link did not contain any post-activation configuration to allow the Orchestrator to communicate with the Edge.
- D. The activation link did not specify the updated image location requiring the Edge to be re-activated.
Answer: D
NEW QUESTION 22
Scenario 2:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator has configured a Business Policy to send a specific application directly out an underlay interface. Users have complained of slow responses for that application. While troubleshooting, the network administrator finds the traffic is actually taking an overlay path to another SD-WAN Edge.
What is causing this behavior?
- A. uI has been configured forcing traffic into the underlay towards the hub.
- B. The other Edge location is advertising a secure route for the application's subnet.
- C. Configuring Business Policy Direct settings have no affect on traffic flows.
- D. Internet Backha.
- E. The underlay path is not available forcing traffic into the overlay.
Answer: A
NEW QUESTION 23
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator is trying to create multiple overlays on a single physical interface on an Edge. The administrator is able to bring up only a single overlay so far, but is having trouble with bringing up additional overlays.
What could be the possible reason?
- A. The licensing does not support multiple overlays on a single physical interface.
- B. Multiple overlays cannot be created on a single physical interface. Multiple physical interfaces are needed.
- C. The administrator does not have the right permission to create multiple overlays. The administrator needs to have an Operator-level privilege for this task.
- D. On the WAN overlay configuration, verify the IP address, next-hop, and the VLAN ID configuration.
Answer: A
NEW QUESTION 24
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator has received an email from the applications development team requesting connectivity to their AWS VPC.
The administrator has configured the tunnel via the VMware SD-WAN Gateway. The tunnel status icon has not turned green.
Where are two places the administrator must check? (Choose two.)
- A. Determine if the PSK is mismatched between the AWS side and the VeloCloud Edge.
- B. Determine if the NVS has been enabled and assigned to a profile.
- C. Determine if the PSK is mismatched between the AWS side and the VeloCloud Gateway.
- D. Determine if the DH parameter on the Edge has been configured.
Answer: A,C
NEW QUESTION 25
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected lo. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users are complaining that web pages to certain web sites are very slow to load and at times unresponsive. The network administrator has verified that the traffic is going correctly out the underlay.
What should the administrator check next?
- A. Verify the Business Policy flows are matching.
- B. Verify if routes to Gateways are present in the Overlay Flow Control (OFC).
- C. Verify if Path-MTU Discovery is disabled.
- D. Verify if there is latency, loss, or jitter on the underlay.
Answer: C
NEW QUESTION 26
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing; internal and external applications.
Exhibit.
A network administrator is configuring several branches to prefer a single prefix, 10.20.11.0/24, from the Seattle hub over the New York hub for various application performance reasons.
What are two effective ways the administrator can accomplish this? (Choose two.)
- A. In the hub preferred order in the profile, set the Seattle hub to be preferred over New York.
- B. Modify the AS Path in New York to be longer for 10.20.11.0/24.
- C. Modify the AS Path in New York to be shorter for 10.20.11.0/24.
- D. In the OFC 10.20.11.0/24, modify the preferred exit point to be Seattle and pin the route.
Answer: A,D
NEW QUESTION 27
Scenario 2:
After completing the branch activation for all required branches, the network administrator attempts to test connectivity between the various branches and between hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the some applications they are accessing.
Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A technician has added Edges to an East Coast Profile. These Edges are not able to communicate via dynamic tunnels to Edges in the West_Coast profile. The technician has noticed that some Edges are able to establish dynamic tunnels.
What could be preventing Edges from being able to establish dynamic tunnels?
- A. Neither profile has been configured to utilize cloud gateways.
- B. The profiles are configured to only allow dynamic branch to branch for Edges within the same profile.
- C. The profiles are not configured to allow dynamic branch to branch VPNs.
- D. None of the existing profiles have Cloud VPN enabled thus preventing dynamic tunnels.
Answer: C
NEW QUESTION 28
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
The SD-WAN Edge at this location has been activated. It is incapable of establishing any overlay tunnels. Due to this being an internet only branch, no underlay connectivity is present to the hubs. The SD-WAN Edge is connected behind a firewall and the security team states that all necessary ports are open.
How can this issue be resolved?
- A. The security team needs to open TCP port 4500 instead of TCP port 2426.
- B. The security team needs to open UDP port 2426 outbound and inbound.
- C. The security team need to open TCP port 2426 outbound but not inbound.
- D. The security team needs to open TCP port 22 instead of TCP port 2426.
Answer: A
NEW QUESTION 29
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator is receiving complaints that a real-time voice application is not performing well, with choppy audio, and dead audio especially during peak traffic times.
What two actions can the administrator take to diagnose and fix the issue? (Choose two.)
- A. Check the status of the links using the QoE and Transport tabs for any degraded underlay issues or congestion issues.
- B. Configure a QoS policy to load balance the realtime traffic across all links.
- C. Configure a QoS policy to rate limit all traffic during peak times.
- D. Ensure that the realtime application is matching the correct application type using the diagnostics page.
Answer: A,C
NEW QUESTION 30
Scenario 1:
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Exhibit.
The network administrator determines the issue preventing the Dallas Branch from coming online.
Refer to the Exhibit(s).
What must the administrator do for the Edge to communicate with the Orchestrator and other branches?
- A. Create a User-defined WAN Overlay to bond both interfaces
- B. Reverse the WAN Overlay configurations
- C. Delete the User Defined WAN Overlays as the Orchestrator will discover these automatically on MPLS and Internet
- D. Update the Orchestrator to the latest version as it enables "Auto WAN Swapping"
Answer: C
NEW QUESTION 31
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network engineer is configuring an Internet Backhaul Policy for the Chicago Branch to utilize NY's hub as a much better source for Internet for certain SaaS applications. For an unknown reason, the network engineer is not able to select the hubs in the Internet Backhaul Policy.
What could be the reason?
- A. The Edge's profile does not include Backhaul hubs as an option.
- B. The hub is not configured with the proper IP address.
- C. Dynamic Branch to Branch using gateways has not been enabled.
- D. The Dynamic Branch to Branch has not been enabled.
Answer: C
NEW QUESTION 32
......
Difficulty in Writing VMware 5V0-41.20: VMware vSAN 6.7 Specialist Exam
5V0-41.20: VMware vSAN 6.7 Specialist is a privileged achievement one could be graced with. Contrary to popular belief, certifying with VmWare is not as difficult as it appears if candidates have the necessary preparation tools to pass the 5V0-41.20: VMware vSAN 6.7 Specialist exam with experience. Certification questions consist of the foremost phenomenal and noteworthy queries, answers and description that consists of the complete course content. Certification questions have a brilliant 5V0-41.20 practice test with the most recent and important questions and answers in PDF files. Real4dumps is confident in the accuracy and legitimacy of 5V0-41.20: VMware vSAN 6.7 Specialist exam dumps. Candidates can easily pass the 5V0-41.20: VMware vSAN 6.7 Specialist exam with genuine 5V0-41.20 dumps and get VmWare certification. These 5V0-41.20 practice exams are viewed as the best source to understand the 5V0-41.20: VMware vSAN 6.7 Specialist well by simply pursuing example questions and answers. If the candidate completes practice the exam with certification 5V0-41.20: VMware vSAN 6.7 Specialist dumps along with self-assessment to get the proper idea on VmWare accreditation and to pass the certification exam.
With the assistance of our expert team of VMware testing professionals, we have developed some quality 5V0-41.20 dumps PDF questions to help our customers plan for the VMware SD-WAN problem solving test 2021 5V0-41.20. Our 5V0-41.20 dumps pdf has a variety of IT student practice questions and replies that not only address the questions for the 5V0-41.20 examination, but also train the mind and depend on the true VMware SD-WAN Troubleshoot test. You just have to make sure you go through our VMware 5V0-41.20 dumps to label your progress at least once. Certificate Queries require delivering easy-to-use VMware SD-WAN troubleshoot 2021 5V0-41.20 practice test questions, which would definitely support the VMware 5V0-41.20 test planning. It is strongly recommended that you use our 5V0-41.20 examination questions to improve your grades. Our 5V0-41.20 practical examination questions are readily accessible for every computer and conveniently to train the consumer for his examination. Exam candidates should be acquainted with the principles of the application life cycle, Debug and validate an HTML5-based application, and have some hands-on experience with the related technology, either by specific training courses or through interacting with videos and demos available on MSDN and in VmWare Visual Studio. The 5V0-41.20 test will allow you to prepare so that you will have a silent similar test until the real test. VMware SD-WAN Troubleshooting 5V0-41.20 PDF questions can be used in a number of ways to give you the best insight into your exam scenario. It will also train you to plan your time for the actual VMware 5V0-41.20 test inside the given framework. But it also shows you time control, in other terms. To ensure the progress of the final exam, you need to go through our IT team’s given 5V0-41.20 test questions.
VMware 5V0-41.20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
All 5V0-41.20 Dumps and Training Courses: https://www.real4dumps.com/5V0-41.20_examcollection.html
