[Dec-2021] H12-211 Pre-Exam Practice Tests | Exam Questions and Answers for HCNA Study Guide
Huawei Certified Datacom Associate-Huawei Networking Technology and Device (HCDA-HNTD) Certification Sample Questions
Evaluating If You're Suitable for the Exam
Even though H12-211 exam does not have any prerequisites, it's highly recommended that applicants are already conversant with basic PC operations and IT technologies. This knowledge will make their certification journey more manageable because most of the exam areas revolve around network infrastructure. Huawei 12-211 targets both theoretical knowledge and technical abilities helping one to demonstrate proficiency in the basics of networking, along with its key connection methods and construction aspects.
Accordingly, the best candidates for this exam are ICT professionals or those with a background in networking such as network administrators, network engineers, and systems administrators. On top of that, students who want to kick off their careers in this field can also make use of this test as a start-up tool.
Certification Path
There is no prerequisite for this Huawei H12-211 exam.
NEW QUESTION 145
What is the default least time of the IP address allocated by the DHCP server
- A. 12 hour
- B. 18 hour
- C. 24 hour
- D. 1 hour
Answer: C
NEW QUESTION 146
Which of the following regarding Frame Relay DLCI are correct? (Choose three)
- A. The same DLCI can be configured on different physical interfaces
- B. DLCI is allocated by DTE
- C. DLCI is locally significant
- D. The range of DLCI value that can be used is from 16-1007
Answer: A,C,D
NEW QUESTION 147
Refer to the graphic. Two switches have been connected as shown and both support STP. The administrator has configured switch A as a DHCP server and set interface VLANIF1 of switch B to obtain an IP address from switch A.
A link failure occurs on port interface G0/0/1 of switch B.
What action will occur as a result?
- A. Swich B will continue to use the IP address obtained from Switch A
- B. Switch B will send a DHCP Release message to release the IP address.
- C. Switch B will send a DHCP Discovery message to obtain a new IP address.
- D. The two switches will be unable to communicate.
Answer: A
NEW QUESTION 148
Which of the following fields are contained in an ARP packet?
- A. Source Hardware Address
- B. Source Protocol Address
- C. Operation Code
- D. Hardware Type
Answer: D
NEW QUESTION 149
Static routing configuration command preference_value parameters, the following statements is correct ().
- A. In the same command several times in preference_value value input, multiple effect
- B. to reach the same destination IP address for multiple routes, routing can be configured to achieve different preference_value backup
- C. In the same command several times in preference_value value can be entered, only the first valid
- D. In the same command several times in preference_value value can enter, only the last valid
Answer: B,D
NEW QUESTION 150
As shown in the Display information, when the switch needs to forward a frame with a destination MAC address of 5489-98ec-f011. The following description is correct ().
- A. The switch needs to send a request to discover the device with the MAC address 5489-98ec-f011.
- B. The switch will send the target unreachable message to the source device.
- C. The switch will flood the frame on all ports except the one that received the frame.
- D. The switch did not find a matching entry in the MAC address table, so the frame will be discarded.
Answer: C
NEW QUESTION 151
An end system is unable to communicate with a DHCP server following the startup process. Which IP address may be used by the client?
- A. 255.255.255.255
- B. 0.0.0.0
- C. 127.0.0.1
- D. 169.254.2.33
Answer: D
NEW QUESTION 152
A company to apply to a Class C IP addresses, but to connect six subsidiaries, the largest subsidiary, has 26 computers, a segment in each subsidiary, the subnet mask should be set
- A. 255.255.255.192
- B. 255.255.255.0
- C. 255.255.255.128
- D. 255.255.255.224
Answer: D
NEW QUESTION 153
Which of the following types of routes can be used by a router to establish a routing table ?
- A. Direct Route
- B. Dynamic Route
- C. Static Route
- D. Aggregated Route
Answer: A,C
NEW QUESTION 154
ICMP protocol is a protocol which the following abbreviations
- A. Intranet Control Message Protocol
- B. Internet Control Message Protocol
- C. Internal Control Mail Protocol
- D. Internet Connection Message Protocol
Answer: B
NEW QUESTION 155
By default, how many seconds is the period of OSPFv3 HELLO packet sending on the Ethernet link?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 156
Which of the following are necessary to configure OSPF on a huawei Router?
- A. Enabling of an OSPF process
- B. Specifying an OSPF area
- C. Configuration of the network segments within each area
- D. Configuration of a router ID
Answer: A,B,C
NEW QUESTION 157
Which packets are used by the DHC1W6 client and the DHCR6 server to determine whether the client uses DFICPv6 stolent autoconfiguration or DHCR stateless autoconfiguration? (Multiple choice)
- A. DA
- B. NS
- C. 13 NA
- D. RS
Answer: A,D
NEW QUESTION 158
If the packet matches the deny rule in an ACL, the packet is discarded
- A. FALSE
- B. TRUE
Answer: B
NEW QUESTION 159
The correct description of GVRP below is ().
- A. GVRP is based on the GARP working mechanism and is used to maintain VLAN dynamic registration information in the device and propagate the information to other devices.
- B. GVRP is enabled by default, or can be manually closed
- C. GVRP is a protocol that must be enabled on the switch, otherwise the switches cannot communicate with each other.
- D. GVRP enables dynamic discovery and deletion of network devices
Answer: A
NEW QUESTION 160
Which of the following steps are necessary to configure OSPF on a Huawei router? (Choose three)
- A. Enabling of an OSPF process
- B. Specifying an OSPF area
- C. Configuration of the network segments within each area
- D. Configuration of a router ID
Answer: A,B,C
NEW QUESTION 161
The configuration information of a router is as follows. Which of the following statement is correct? (Multiple Choice)
- A. if the username Huawei is used for authentication, the password needs to be 654321.
- B. The authorization mode used by the domain which domain name is Huawei is local authorization.
- C. The authentication mode used by the domain which domain name is Huawei is local authentication.
- D. The domain which domain name is Huawei does not use the accounting scheme
Answer: B,D
NEW QUESTION 162
Which of the following commands can enable the DHCP relay function of the router interface?
- A. dhcp select interface
- B. dhcp select global
- C. dhcp select relay
- D. dhcp select server
Answer: C
NEW QUESTION 163
In a small network suppporting IPv6, a network administrator wishes implement RIPng. Which of the following commands should be used to enable this protocol?
- A. <RTA>ripng 1 enable
- B. [RTA]ripng 1 enable
- C. [RTA-ripng-1]ripng 1 enable
- D. [RTA-GigabitEthernet0/0/0]ripng 1 enable
Answer: D
NEW QUESTION 164
The following configuration commands implement route backup on RTA for a route to the same destination
10.1.1.0.
- A. FALSE
- B. TRUE
Answer: A
NEW QUESTION 165
Two authentication domains "Area I" and "Area 2" are configured on a router Mel serves as the authentication server. FM:tit.er arrgentrealm wrIf the correct usemamelivatwer" and passauml "heir Wrieh authentication Wraith wig the 0...signed to?
- A. Authentication Minim "default domain
- B. Authentication domain 'Area?
- C. Authentication domain 'Areal"
- D. Authentication domain 1default_admin domain
Answer: A
NEW QUESTION 166
The function of OSPF hello packets is (). (multiple choice)
- A. Maintaining neighbor relationships
- B. Discovering neighbors
- C. Synchronous router LSDB
- D. Publish parameter information such as Router ED and Router Priority.
Answer: A,B,D
NEW QUESTION 167
Which of the following statements about the Adjacency Segment is wrong?
- A. Adjacency Segment is identified by Adjacency Segment ID (STD)
- B. Adjacency Segment is used to identify a certain adjacency of a node in the network_
- C. Adjacency Segment spreads to other network elements through the IGP protocol, which is globally visible and valid locally.
- D. Adjacency Segment must be manually configured
Answer: D
NEW QUESTION 168
According to the geographical scope of coverage, the network can be divided into
- A. LAN
- B. WAN
- C. Campus
- D. Enterprise Network
Answer: A,B
NEW QUESTION 169
......
Huawei Exam Practice Test To Gain Brilliante Result: https://www.real4dumps.com/H12-211_examcollection.html
