Most UptoDate Cisco 500-220 Exam Dumps PDF 2021 [Q32-Q50]

Share

Most UptoDate Cisco 500-220 Exam Dumps PDF 2021

100% Free Cisco Meraki Solutions Specialist 500-220 Dumps PDF Demo Cert Guide Cover


Cisco 500-220 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Wireless client connectivity issues using Dashboard
  • Network access control solutions
Topic 2
  • Redundant networks and high availability
  • Explain deployment consideration for the vMX
Topic 3
  • Design stable, secure, and scalable routing deployments
  • Explain Cisco Meraki cloud architecture
Topic 4
  • Explain organizational structure, segmentation and permissions
  • Explain licensing, co-termination, and renewals
Topic 5
  • Alerts with Dashboard, SNMP, Syslog and Netflow in Dashboard
  • Security threats using Security Center
Topic 6
  • Sentry for Meraki managed deployments
  • Design scalable Meraki Auto VPN architectures
Topic 7
  • Device enrollment such as supervised and device owner
  • Interpret information from monitoring and reporting tools
Topic 8
  • Troubleshooting Enterprise networks
  • Compare deployment workflows
Topic 9
  • Threat protection and content filtering rules
  • Explain access methods to dashboard and devices

 

NEW QUESTION 32
Which two actions can extend the video retention of a Cisco Meraki MV Smart Camera? (Choose two.)

  • A. installing an SSD memory extension
  • B. enabling maximum retention limit
  • C. enabling motion-based retention
  • D. enabling audio compression
  • E. configuring a recording schedule

Answer: C,E

 

NEW QUESTION 33
Refer to the exhibit.

What are two outcomes reflected in the Web App Health application? (Choose two.)

  • A. Network #1 could not load Google because of a remote server issue.
  • B. Network #2 had better application performance than Network #1.
  • C. Network #2 could not load Google because of a local client misconfiguration.
  • D. Users on both networks may be experiencing issues when attempting to reach Google.
  • E. Neither network recorded any server-side performance issues.

Answer: A,E

 

NEW QUESTION 34
Refer to the exhibit.

This Dashboard organization uses Co-Termination licensing model.
What happens when an additional seven APs are claimed on this network without adding licenses?

  • A. All network devices stop functioning in 30 days.
  • B. One AP Immediately stops functioning.
  • C. All APs stop functioning in 30 days.
  • D. All APs immediately stop functioning.

Answer: A

 

NEW QUESTION 35
Which type of authentication protocol is used when using OSPF on an MX appliance?

  • A. MD5
  • B. plaintext
  • C. certificate
  • D. SHA-1

Answer: A

Explanation:
Reference:
Using_OSPF_to_Advertise_Remote_VPN_Subnets

 

NEW QUESTION 36
Refer to the exhibit.

Which design recommendation should be considered?

  • A. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.
  • B. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
  • C. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
  • D. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.

Answer: C

 

NEW QUESTION 37
Refer to the exhibit.

A packet arrives on the VPN concentrator with source IP 10.168.70.3 and destined for IP 10.116.32.4.
What is the next hop for the packet, based on this concentrator routing table?

  • A. The concentrator gateway (10.128.124.62) is the next hop.
  • B. The Auto VPN peer "Store 1532 - appliance" is the next hop.
  • C. Not enough detail is available to determine the next hop.
  • D. The packet is stopped.

Answer: C

 

NEW QUESTION 38
Refer to the exhibit.

What is the minimal Cisco Meraki Insight licensing requirement?

  • A. A single Meraki Insight license must be configured on network B to gain Web App Health visibility on network B.
  • B. Two Meraki Insight licenses must be configured on network A to gain Web App Health visibility on network B.
  • C. A single Meraki Insight license must be configured on network A to gain Web App Health visibility on network B.
  • D. Two Meraki Insight licenses must be configured on network A and a single license must be configured on network B, to gain Web App Health visibility on network B.
  • E. A single Meraki Insight license must be configured on network A, and a single license must be configured on network B, to gain Web App Health visibility on network B.

Answer: D

 

NEW QUESTION 39
Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?

  • A. MV Smart Camera
  • B. MR Access Point
  • C. Meraki Insight
  • D. MS Switch

Answer: B

 

NEW QUESTION 40
One thousand concurrent users stream video to their laptops. A 30/70 split between 2.4 GHz and 5 GHz is used.
Based on client count, how many APs (rounded to the nearest whole number) are needed?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

 

NEW QUESTION 41
Refer to the exhibit.

Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?

  • A. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the "Conf" performance class.
  • B. WebEx traffic will prefer WAN 2 as long as it is up.
  • C. WebEx traffic will prefer WAN 1 as it is the primary uplink.
  • D. WebEx traffic will be load-balanced between both active WAN links.

Answer: C

 

NEW QUESTION 42
Which three verbs of request are available in the Cisco Meraki API? (Choose three.)

  • A. PATCH
  • B. POST
  • C. GET
  • D. PUT
  • E. ADD
  • F. SET

Answer: B,C,D

Explanation:
Reference:
Cisco_Meraki_Dashboard_API

 

NEW QUESTION 43
Refer to the exhibit.

For an AP that displays this alert, which network access control method must be in use?

  • A. preshared key
  • B. WPA2-enterprise with my RADIUS server
  • C. splash page with my RADIUS server
  • D. MAC-based access control with RADIUS server

Answer: A

 

NEW QUESTION 44
How is high-availability supported for Cisco Meraki devices?

  • A. The MX Security Appliances and MS Series Switches that use VRRP support an active/passive high- availability pair.
  • B. Only the MX Security Appliances that use VRRP support high availability.
  • C. An active/active high-availability pair is recommended for MX Security Appliances.
  • D. The MX Security Appliances and MS Series Switches that use HSRP support an active/passive high- availability pair.

Answer: B

Explanation:
Reference:
_High_Availability_Pair

 

NEW QUESTION 45
For which two reasons can an organization become "Out of License"? (Choose two.)

  • A. MR licenses that do not match the MR models in the organization
  • B. more hardware devices than device licenses
  • C. licenses that are in the wrong network
  • D. expired device license
  • E. licenses that do not match the serial numbers in the organization

Answer: B,D

 

NEW QUESTION 46
What is a feature of distributed Layer 3 roaming?

  • A. All wireless client traffic can be split-tunneled.
  • B. An MX Security Appliance is not required as a concentrator.
  • C. An MX Security Appliance is required as a concentrator.
  • D. All wireless client traffic is tunneled.

Answer: B

Explanation:
Reference:
Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MR_Wireless/
Wireless_Layer_3_Roaming_Best_Practices

 

NEW QUESTION 47
Where should a network admin navigate to investigate wireless mesh information between Meraki APs?

  • A. Wireless > Monitor > RF Spectrum
  • B. Wireless > Monitor > Wireless Health
  • C. Wireless > Monitor > Access Points > AP > RF
  • D. Wireless > Configure > Radio Settings

Answer: C

 

NEW QUESTION 48
Refer to the exhibit.

What does the MX Security Appliance send to determine whether VPN traffic exceeds the configured latency threshold in the VoIP custom performance class?

  • A. 100-byte UDP probes every second, through VPN tunnels that are established over every WAN link.
  • B. 100-byte UDP probes every second, through VPN tunnels that are established over the primary WAN link.
  • C. 1000-byte TCP probes every second, through VPN tunnels that are established over the primary WAN link.
  • D. 1000-byte TCP probes every second, through VPN tunnels that are established over every WAN link.

Answer: D

 

NEW QUESTION 49
Refer to the exhibit.

Which two actions are required to optimize load balancing asymmetrically with a 4:1 ratio between links? (Choose two.)

  • A. Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1.
  • B. Enable load balancing.
  • C. Change the primary uplink to "none".
  • D. Set the speed of the cellular uplink to zero.
  • E. Add an internet traffic preference that defines the load-balancing ratio as 4:1.

Answer: B,E

 

NEW QUESTION 50
......

Updated Cisco 500-220 Dumps – PDF & Online Engine: https://www.real4dumps.com/500-220_examcollection.html

PDF Exam Material 2021 Realistic 500-220 Dumps Questions: https://drive.google.com/open?id=1c4DFcxtApvuMnxrVx4JQHTwgcFGnrait