Pass SASInstitute A00-282 exam questions - convert Test Engine to PDF
Pass Your A00-282 Exam Easily - Real A00-282 Practice Dump Updated Dec 10, 2024
The SAS Institute is globally recognized for its technical prowess and expertise in the field of data analytics tools and software. Over the years, the SAS team has produced an array of quality certification programs that help interested individuals to become SAS experts. The SASInstitute A00-282: Clinical Trials Programming Using SAS 9.4 is one of the most popular SAS exams recognized worldwide.
SASInstitute A00-282 exam is intended for individuals who have a basic understanding of SAS programming and are interested in enhancing their skills in clinical trial programming. A00-282 exam is suitable for clinical research professionals such as data managers, statisticians, clinical research associates, and clinical data analysts. Candidates who pass the exam will have a better understanding of clinical trial data management, analysis, and reporting.
NEW QUESTION # 58
Where would you store a value collected on a case report form but not defined in an SDTM domain?
- A. DM
- B. SUPPQUAL
- C. RELREC
- D. SC
Answer: B
NEW QUESTION # 59
Given the following vital signs data: Baseline is defined as the last non-missing value prior to Day 1.
What is the value for the change from baseline for Week 1 for Subject 2?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 60
The following SAS program is submitted:
%let Av=age;
%macro LABD(Av=weight);
%let Av=gend; %mend;
%LABD(Av=height)
%put Av is &Av;
What will be written to the SAS log?
- A. Av is weight
- B. Av is height
- C. Av is age
- D. Av is gend
Answer: C
NEW QUESTION # 61
How does the code shown below help to validate report output?
data check;
set datlib.medhist;
mh_len = length(trim(mhcom1));
run;
proc freq data=check;
tables mh_len;
run;
- A. It shows all the values for mhcom1 in the results.
- B. It helps the programmer determine which observation has the longest value for mhcom1.
- C. It shows all the values for the length of mhcom1 in the results.
- D. It writes all values of the mhcom1 variable that are longer than 200 in the results.
Answer: C
NEW QUESTION # 62
Given the SAS data set WORK.VS1:
Which value will be assigned to variable TOTAL?
- A. 0
- B. 1
- C. 2
- D. missing
Answer: C
NEW QUESTION # 63
Given the full data set SUBJECT.DEMO:
The following SAS program is submitted:
%macro MP_ONE(pname=report);
proc &pname data=SUBJECT.DEMO;
run;
%mend;
%MP_ONE(print)
%MP_ONE()
Which PROC step(s), if any, execute?
- A. No PROC steps execute
- B. PROC REPORT and PROC PRINT
- C. PROC REPORT only
- D. PROC PRINT only
Answer: C
NEW QUESTION # 64
What is an international ethical and scientific quality standard for designing, conducting, recording and reporting trials that involve the participation of human subjects
- A. MedDRA
- B. WHODrug
- C. Good Clinical Practices
- D. 21 CFR Part 11
Answer: C
NEW QUESTION # 65
The following SAS program is submitted:
proc sort data=SASUSER.VISIT out=PSORT; by code descending date cost; run; Which statement is true regarding the submitted program?
- A. The PSORT data set is stored in the SASUSER library.
- B. The variable CODE is sorted by ascending order.
- C. The descending option applies to the variable CODE.
- D. The descending option applies to the DATE and COST variables.
Answer: B
NEW QUESTION # 66
Given the following partial output data set:
Which code was used to create AGECAT?
- A. if age <=18 then do AGECAT=1; else if 18<AGE<=40 then do AGECAT=2; else do AGECAT=3;
- B. if age <18 then AGECAT=1; if 18<=AGE<=40 then AGECAT=2; else AGECAT=3;
- C. if age <=18 then AGECAT=1; else if 18<AGE<=40 then AGECAT=2; else AGECAT=3;
- D. if age <18 then AGECAT=1; else if 18<=AGE<=40 then AGECAT=2; else AGECAT=3;
Answer: C
NEW QUESTION # 67
The following question will ask you to provide a line of missing code. The following program is submitted to output observations from data set ONE that have more than one record per patient.
Please enter the line of code that will correctly complete the program. Note: Case is ignored. Do not add leading or trailing spaces to your answer.
- A. BYSUBJID;
BYSUBJID; - B. id;
PTON run; - C. BYSUBJID;
run; - D. BYSUBJID;
Answer: D
NEW QUESTION # 68
Given the following demographic dataset:
Which program will generate a report where observations will appear in order by SITE SUBJECT and display column headers for each variable defined in the column statement?
- A. Proc Report;
column site subject trt age gender race;
define site/order style(header)={'Site'};
define subject/order style(header)={'Subject'};
define trt/style(header)={'Treatment'};
define age/style(header)={'Age'};
define gender/style(header)={'Gender'};
define race/style(header)={'Race'};
run; - B. Proc Report;
column site subject trt age gender race;
define site, subject, trt, age, gender, race;
y site subject;
title 'Site Subject Treatment Age Gender Race';
run; - C. Proc Report;
column site subject trt age gender race;
define site/'Site', subject/'Subject',
trt/'Treatment', age/'Age', gender/'Gender',
race/'Race'; run; - D. Proc Report;
column site subject trt age gender race;
define site/order 'Site';
define subject/order 'Subject';
define trt/'Treatment';
define age/'Age';
define gender/'Gender';
define race/'Race';
run;
Answer: D
NEW QUESTION # 69
You want 90% confidence limits for a binomial proportion from a one-way table with PROC FREQ.
Which option must you add to the TABLES statement?
- A. BINOMIAL ALPHA=0.1
- B. BINOMIAL ALPHA=0.9
- C. BINOMIAL ALPHA=90
- D. BINOMIAL
Answer: A
NEW QUESTION # 70
Study day is defined as DCMDATE minus RFSTDTC +1
Which statement will compute the study day correctly without producing notes for missing values in the log?
- A. If RFSTDTC^='' and length(DCMDATE)=8 then STUDYDAY=input(DCMDATE,date9.)- input(RFSTDTC,yymmdd8.)+1;
- B. STUDYDAY=input(DCMDATE,yymmdd8.)-input(RFSTDTC,date9.)+1;
- C. If RFSTDTC^='' and length(DCMDATE)=8 then STUDYDAY=input(DCMDATE,yymmdd8.)- input(RFSTDTC,date9.)+1;
- D. STUDYDAY=DCMDATE-RFSTDTC+1;
Answer: C
NEW QUESTION # 71
In a study, inclusion criteria required patients be between 18 and 65. Patients will be analyzed in 2 age groups: group one is subjects who are under 36 years of age and group two is subjects who are 36 years of age or older.
Which statements properly assign age group, and writes an error message to the log for any patient with an out of range age value?
- A. select;
when (age >= 66) put "ERROR: AGE OUT OF PROTOCOL SPECIFIED RANGE FOR " subject= age=; when (36 <= age < 66) agegrp = 2; when (18 <= age < 66) agegrp = 1; end; - B. select;
when (age >= 66) put "ERROR: AGE OUT OF PROTOCOL SPECIFIED RANGE FOR " subject= age=; when (age >= 36) agegrp = 2; when (age >= 18) agegrp = 1; otherwise; end; - C. select;
when (18 <= age < 36) agegrp = 1;
when (36 <= age < 66) agegrp = 2;
otherwise put "ERROR: AGE OUT OF PROTOCOL SPECIFIED RANGE FOR " subject= age=; end; - D. select;
when (age >= 18) agegrp = 1;
when (age >= 36) agegrp = 2;
when (age >= 66) put "ERROR: AGE OUT OF PROTOCOL SPECIFIED RANGE FOR " subject= age=; end;
Answer: C
NEW QUESTION # 72
Given the following log entry:
Which SAS system option adds the blue highlighted lines to the log?
- A. INVALIDDATA='I'
- B. NOTES
- C. INFO
- D. MSGLEVEL=I
Answer: D
NEW QUESTION # 73
The following partial output was produced from the SAS Dictionary Tables.
Which SQL statement produced this output?
- A. proc sql;
select scope, name from dictionary.macros
where scope = 'global';
quit; - B. proc sql;
select scope, name from dictionary.macros
where scope = 'GLOBAL';
quit; - C. proc sql;
select * from dictionary.macros
where scope = 'GLOBAL';
quit; - D. proc sql;
select * from dictionary.macros
where scope = 'global';
quit;
Answer: B
NEW QUESTION # 74
This question will ask you to provide a missing option.
The following program is submitted to create a transport file for multiple data sets:
Which option will limit the files that are copied to type data?
- A. memtype=data
- B. include=data
- C. entrytype=data
- D. intype=data
Answer: A
NEW QUESTION # 75
A SAS program is submitted and the following log is written.
What is the cause of this error message?
- A. The DO loop tries to get a value from a variable which does not exist.
- B. The IF statement tries to get ARRAY elements which are not declared.
- C. The IF statement is syntactically incorrect.
- D. The ARRAY declaration is syntactically incorrect.
Answer: B
NEW QUESTION # 76
Given the following output from the TTEST Procedure: Variable:
What is the t-test p-value?
- A. <.0001
- B. 37.49
- C. 0.3121
- D. 0.2041
Answer: A
NEW QUESTION # 77
A Statistical Analysis Plan (SAP) defines the selection process for baseline records. This instructs the programmer to choose the last non-missing analyte value prior to first study drug administration (date/time).
The DEMO data set contains the date/time of first study drug administration for subject:
What will be the resulting baseline values, as selected per the SAP instructions?
- A. Option A
- B. Option C
- C. Option D
- D. Option B
Answer: C
NEW QUESTION # 78
A Statistical Analysis Plan defines study day as the number of days between the visit date and the date of randomization plus one day.
The following SAS program is submitted using a macro from the project's library:
How is the STUDYDAY macro defined?
- A. %MACRO studyday(rand, visit);
&visit. ?&rand. + 1
%MEND studyday; - B. %MACRO studyday(visit=, rand=);
&visit. ?&rand. + 1
%MEND studyday; - C. %MACRO studyday(rand, visit);
&vdt. ?&rdt. + 1
%MEND studyday; - D. %MACRO studyday(rand=, visit=);
&vdt. ?&rdt. + 1
%MEND studyday;
Answer: A
NEW QUESTION # 79
Which statement correctly adds a label to the data set?
- A. DATA two; set one; Label dataset="Subjects having duplicate observations"; run;
- B. DATA two; Label="Subjects having duplicate observations"; set one; run;
- C. DATA two Label="Subjects having duplicate observations"; set one; run;
- D. DATA two (Label="Subjects having duplicate observations"); set one;
Answer: D
NEW QUESTION # 80
Given the following data set DEMOG:
Which selection below would be considered hard-coding?
- A. birthdt = input(dob, mmddyy10.);
- B. if site eq 1 then sexcd = 2; else if site eq 2 then sexcd = 1;
- C. if site eq 1 and sexcd ne 2 then check = 1; else if site eq 2 and sexcd ne 1 then check = 2;
- D. if sexcd eq 1 then sex = "Male"; else if sexcd eq 2 then sex = "Female";
Answer: C
NEW QUESTION # 81
Given the following code executed with system date and time of April 29, 2020 at 10:33 AM:
data _null_;
daytim=put("&sysdate"d,date9.)||" "||put("&systime"t,time8.);
call symputx("nowdate", daytim);
run;
%put &nowdate;
The output of the macro variable "nowdate" in the log will be:
- A. daytim
- B. 29APR2020 10:33:00
- C. 29APR2020 10:33 AM
- D. &nowdate
Answer: B
NEW QUESTION # 82
Identify the data structure with the following characteristics:
- Contains one or more records per subject, per analysis parameter, and per analysis timepoint.
- May be derived from findings, events, interventions and special-purpose SDTM domains, or other ADaM datasets.
- A record can represent an observed, derived, or imputed value required for analysis.
- A. General Data Structure (GDS)
- B. Basic Data Structure (BDS)
- C. Event Level Analysis Data Set (ADAE)
- D. Subject Level Analysis Data Set (ADSL)
Answer: B
NEW QUESTION # 83
......
SASInstitute A00-282 exam consists of multiple-choice questions, and candidates have three hours to complete the exam. A00-282 exam is computer-based and can be taken at a Pearson VUE testing center. A00-282 exam fee is $180, and candidates can register for the exam through the SAS website. A00-282 exam is available in multiple languages, including English, Japanese, and Chinese.
A00-282 Real Exam Questions and Answers FREE: https://www.real4dumps.com/A00-282_examcollection.html
2024 Realistic Verified Free SASInstitute A00-282 Exam Questions: https://drive.google.com/open?id=1G8thyLt9pPhSgloK3wVx3cHbXaFpNg6g
