Supermicro New 2025 SMI300XE Sample Questions Reliable SMI300XE Test Engine
Feel Supermicro SMI300XE Dumps PDF Will likely be The best Option
NEW QUESTION # 19
If you need to replace a failed GPU in an MI300X system, what must you do to gain access to the GPUs in the system?
- A. Configure the SCC.
- B. Use the LSPCI command.
- C. Remove the GPU tray.
- D. Update the AMD command.
Answer: C
Explanation:
Toaccess and replace a failed GPUin theMI300X system, you mustremove the GPU tray.
* Option A (Incorrect):UpdatingAMD commandsdoes not physically grant access to GPUs.
* Option B (Incorrect):LSPCIis used tolist PCI devices, not to physically access the GPUs.
* Option C (Incorrect):SCC configurationis unrelated to physical GPU replacement.
* Option D (Correct):Removing the GPU trayis the only way tophysically access and replace GPUs.
NEW QUESTION # 20
What is the executable file extension used in Windows for SUM?
- A. .exe
- B. binary
- C. .sh
- D. .txt
Answer: A
Explanation:
This question is a duplicate ofQuestion No. 20. The correctWindows executable file extension for SUM is .
exe.
* Option A (Correct):SUM on Windows is executed using .exe.
* Option B (Incorrect):.sh is a script file format for Linux, not Windows.
* Option C (Incorrect):.txt files contain textand cannot execute commands.
* Option D (Incorrect):"binary" is not a valid file extension for SUM execution on Windows.
NEW QUESTION # 21
What information is useful for identifying system issues and their timing?
- A. Subnet Mask
- B. Last login attempt
- C. Event log
- D. GPU memory specification
Answer: C
Explanation:
Theevent logis the primary source of information for identifyingsystem issues and their exact timing. The IPMI event logrecords all critical system alerts, includinghardware failures, temperature warnings, power issues, and other critical errors.
* Option A (Incorrect):GPU memory specifications do not provide issue tracking information.
* Option B (Correct):Theevent log tracks all system events and errors, making it essential for troubleshooting.
* Option C (Incorrect):Subnet masks relate to network configurations and do not provide system issue tracking.
* Option D (Incorrect):Last login attempts show security logs but arenot related to hardware or system issues.
NEW QUESTION # 22
When working on the GPU tray, where should you place it to ensure a safe work environment?
- A. A flat surface
- B. On top of the chassis
- C. On the floor where everyone is walking by
- D. On a cardboard box that may or may not support the weight of the tray
Answer: A
Explanation:
When handling theGPU tray, it should be placed ona flat, stable surfacetoprevent damage and ensure safety.
* Option B (Correct):Aflat surfaceprovides stability and preventsaccidental damage or tipping.
* Option A (Incorrect):Placing the trayon top of the chassiscan cause it tofall and sustain damage.
* Option C (Incorrect):Thefloor is unsafedue tofoot traffic, riskingaccidental damage.
* Option D (Incorrect):Acardboard box may not support the tray's weight, making itunstable.
NEW QUESTION # 23
What is the main purpose of the AGFHC software tool?
- A. The AGFHC tool is used to diagnose and stress test components on the MI300X. This will help identify and validate component issues.
- B. The AGFHC tool is used to support other platforms such as Mac OS and Windows so they can all share GPU system resources.
- C. The AGFHC tool is used for checking support phone numbers and emails for AMD GPU support staff who should be the first point of contact for any issues related to AMD GPUs.
- D. The AGFHC tool is used to update firmware and BIOS on the GPU to ensure that it is up to datewith the latest code.
Answer: A
Explanation:
TheAGFHC toolis designed todiagnose and stress test system componentsin theMI300X platform, helping identify faultsin GPUs, CPUs, and system hardware.
* Option A (Correct):AGFHC isused for diagnostics and stress testing.
* Option B (Incorrect):The tool doesnot enable cross-platform GPU resource sharing.
* Option C (Incorrect):While itinteracts with firmware, it doesnot update BIOS.
* Option D (Incorrect):The tool isnot a support contact directory.
NEW QUESTION # 24
When replacing a failed GPU, what is the proper torque driver setting for tightening the GPU screws?
- A. 4.2 in-lbf
- B. 6-8 in-lbf
- C. 5.3 Nm
- D. 9.5 in-lbf
Answer: B
Explanation:
Thecorrect torque setting for GPU screwsin anMI300X systemis6-8 in-lbf. This ensures asecure fit without overtightening, which could damage the GPU.
* Option C (Correct):6-8 in-lbf isthe recommended torquefor securing GPU screws.
* Option A (Incorrect):4.2 in-lbf istoo low, leading to loose screws.
* Option B (Incorrect):9.5 in-lbf istoo high, risking damage to the GPU mounting.
* Option D (Incorrect):5.3 Nm isnot used for GPU mounting screws.
NEW QUESTION # 25
How would you identify and differentiate a failed GPU that needs to be replaced from other GPUs in the system that are functional?
- A. By the serial number
- B. By the discoloration
- C. By the part number
- D. By the warning light
Answer: D
Explanation:
A failed GPU in the Supermicro MI300X system can be identified usingthe warning light indicator.
Supermicro systems includeLED diagnostic indicatorsthat display the operational status of various components, including GPUs. When a GPU malfunctions, the system will trigger an alert that is displayed as a warning light on the GPU tray or the server chassis. This allows technicians to visually identify the faulty GPU without requiring extensive hardware testing.
* Discoloration (A)is not a reliable method of identifying a failed GPU as it would require physical degradation, which is uncommon.
* Serial numbers (B)andPart numbers (C)are used for inventory tracking but do not indicate functional status.
* Warning lights (D)are the recommended method, as documented in the system health monitoring section of Supermicro's documentation, which detailsLED indicators and diagnostic lights for system status monitoring.
NEW QUESTION # 26
Which 2 ROCm commands should you run to gather AMD GPU information from the server?
- A. sudo rockm-smc, and sudo rockm-bug.report.txt
- B. sudo rocm-smi -a, and sudo rocm-smi
- C. sudo rocm-gpu, sudo rocm-baseboardgpu
- D. sudo rocm-csv, and sudo rocm-amd.bug.txt
Answer: B
Explanation:
TheROCm System Management Interface (rocm-smi)is the recommended tool forgathering AMD GPU informationfrom the server.
* Option D (Correct):
* sudo rocm-smi -a displaysall available GPU information.
* sudo rocm-smi showsbasic GPU stats.
* Option A (Incorrect):These arenot valid ROCm commands.
* Option B (Incorrect):"rockm-smc" and "rockm-bug.report.txt"do not exist in ROCm.
* Option C (Incorrect):"rocm-gpu" and "rocm-baseboardgpu" arenot standard AMD diagnostic commands.
NEW QUESTION # 27
How many people are required to safely remove the GPU tray from the MI300X?
- A. 10 people
- B. 6 people
- C. 1 person
- D. 2 people
Answer: D
Explanation:
Tosafely remove the GPU trayfrom theMI300X system,two peopleare required.
* Option A (Incorrect):One personcannot safely removethe tray as it is too heavy (~70 lbs).
* Option B (Incorrect):Six people are unnecessary for this task.
* Option C (Correct):Two peoplearerecommended by Supermicroto ensure safe removal.
* Option D (Incorrect):Ten people are excessive and impractical.
Thus,the correct answer is C (2 people).
NEW QUESTION # 28
The syntax and options for the SUM command differ between Windows and Linux.
- A. False
- B. True
Answer: B
Explanation:
TheSUM (Supermicro Update Manager) commandhas differentsyntax and optionsbetweenWindows and Linuxversions.
* OnWindows, the SUM command uses .exe files and standard Windows CLI syntax.
* OnLinux, SUM commands use native Linux paths, shell scripting, and different argument formatting.
For example:
* Windows:sum.exe -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
* Linux:./sum -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
Since syntax differs,the correct answer is True.
NEW QUESTION # 29
In which directory should the AGFHC tool be installed for it to function properly in Ubuntu?
- A. Directory - /usr/home/customer/AGFHC
- B. Directory - /tmp/amd/AGFHC/files
- C. Directory - /windows/user/desktop
- D. Directory - /opt/AMD/AGFHC
Answer: D
Explanation:
TheAGFHC tool for Ubuntumust be installed in the/opt/AMD/AGFHCdirectory.
* Option A (Incorrect):The/tmp/directory istemporary storageand is not used forapplication installations.
* Option B (Incorrect):/windows/user/desktopis a Windows path and does not apply to Linux-based Ubuntu.
* Option C (Incorrect):/usr/home/customer/AGFHCis not the correct standard directory for system- wide software.
* Option D (Correct):/opt/AMD/AGFHCis the correct directory for installing AMD-related tools in Ubuntu.
NEW QUESTION # 30
Which SUM command is used to check basic system information?
- A. sum.exe call system information
- B. sum.exe -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
- C. sum.exe -ip 10.1.1.100 -user ADMIN -pass ADMIN -command checksysteminfo
- D. sum.exe -I 10.1.1.100 -u ADMIN -p ADMIN -c checkassetinfo
Answer: B
Explanation:
TheSUM (Supermicro Update Manager) command to check basic system informationis:
css
CopyEdit
sum.exe -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
* Option A (Correct):This is the correct syntax for retrievingbasic system information using SUM.
* Option B (Incorrect):The syntaxis incorrect and will not execute properly.
* Option C (Incorrect):The"checksysteminfo" command is not validin SUM.
* Option D (Incorrect):"checkassetinfo"retrieves system asset details, not basic system information.
NEW QUESTION # 31
When removing the GPU tray, where are the two screws located that must be loosened to allow the handles to be pulled out/down?
- A. Bottom of the GPU tray
- B. One on top and one on bottom of the GPU tray
- C. One on each side of the GPU tray
- D. Top of the GPU tray
Answer: C
Explanation:
Toremove the GPU tray, you need toloosen two screwslocatedone on each side of the tray.
* Option B (Correct):There isone screw on each sidethat must beloosenedbefore pulling the handles out
/down.
* Option A (Incorrect):The screwsare not only on the top.
* Option C (Incorrect):The screwsare not only on the bottom.
* Option D (Incorrect):Thereis no screw configurationwithone on top and one on the bottom.
NEW QUESTION # 32
......
Use Valid New SMI300XE Test Notes & SMI300XE Valid Exam Guide: https://www.real4dumps.com/SMI300XE_examcollection.html
SMI300XE exam torrent Supermicro study guide: https://drive.google.com/open?id=1L1VUH6yf6Uvoxnmqun-_LDJdSn9jr32Z
