Unique Top-selling HPE6-A73 Exams - New 2023 HP Pratice Exam
Aruba Certified Switching Professional (ACSP) V1 Dumps HPE6-A73 Exam for Full Questions - Exam Study Guide
NEW QUESTION # 48
A company has implemented 802 1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA Each switch has the two servers defined A network engineer notices the following command configured on the AOS'CX switches:
radius-server tracking user-name monitor password plaintext arubal23
What is the purpose of this configuration?
- A. Speed up the AAA authentication process
- B. Define the account to implement change of authorization.
- C. Define the account to implement downloadable user roles
- D. implement replay protection for AAA messages
Answer: A
NEW QUESTION # 49
Examine the network exhibit:
The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)
- A. Server 1 to Client 1
- B. Client 1 to Client 2
- C. Client 1 to Client 3
- D. Client 3 to Client 2
- E. Server 2 to Client 2
Answer: A,B
NEW QUESTION # 50
An administrator is supporting a network with the access layer consisting of AOS-CX 6300 and 6400 switches. The administrator needs to quickly deploy Aruba IAPs and security cameras in the network, ensuring that the correct QoS and VLAN settings are dynamically applied to the switch ports. Currently, switches are not configured to do device authentication, and no authentication server exists in the network.
Which AOS-CX feature should the administrator use to dynamically assign the policy settings to the correct switch ports?
- A. Voice VLANs
- B. Dynamic segmentation
- C. Device profiles
- D. Change of authorization
Answer: C
NEW QUESTION # 51
How is NetEdit installed at a customer location?
- A. Via a DVD using a virtualized platform like Microsoft's Hyper-V
- B. Via me Aruba Central cloud solution
- C. Via an OVA file and a virtualized platform like VMware's ESXi
- D. Via an Aruba NetEdit hardware appliance
Answer: C
NEW QUESTION # 52
What is correct regarding policy-based routing?
- A. Policy actions include routing permitting or dropping traffic.
- B. Monitoring of policy interfaces occurs every 60 seconds.
- C. Policies can only be applied to routed interfaces.
- D. Policies can be applied inbound and outbound.
Answer: C
NEW QUESTION # 53
What is a best practice concerning voice traffic and dynamic segmentation on AOS-CX switches?
- A. Switch authentication and local forwarding of the voice traffic
- B. Switch authentication and user-based tunneling of the voice traffic
- C. Controller authentication and user-based tunneling of the voice traffic
- D. Controller authentication and port-based tunneling of the voice traffic
Answer: D
NEW QUESTION # 54
Which protocols are used by NetEdit to interact with third-party devices? (Choose two.)
- A. telnet
- B. CDP
- C. SSH
- D. Restful API
- E. SNMP
Answer: C,E
NEW QUESTION # 55
An administrator creates an ACL rule with both the "count" and "log" option enabled. What is correct about the action taken by an AOS-CX switch when there is a match on this rule?
- A. By default, a summarized log is created every minute with a count of the number of matches
- B. Logging will not include certificate and TLS events, but counting will
- C. The "count" and "log" options are processed by the AOS-CX switch's hardware ASIC
- D. The total in the "log" record and the count could contain different rule matching statistics
Answer: D
NEW QUESTION # 56
A network administrator is attempting to troubleshoot a connectivity issue between a group of users and a particular server. The administrator needs to examine the packets over a period of time from their desktop; however, the administrator is not directly connected to the AOS-CX switch involved with the traffic flow.
What is correct regarding the ERSPAN session that needs to be established on an AOS-CX switch?
(Choosetwo.)
- A. On the source AOS-CX switch, the destination specified is the administrator's desktop
- B. The encapsulation protocol is UDP
- C. The encapsulation protocol used is GRE
- D. The encapsulation protocol used is VXLAN
- E. On the source AOS-CX switch, the destination specified is the switch to which the administrator's desktop is connected
Answer: A,C
NEW QUESTION # 57
Examine the attached diagram.
The two PCs are located in VLAN 11 (10.1.11.0/24). Which example defines how to implement active gateway on the VSX core for VLAN 11?
- A. interface lag 254
active-gateway vlan 11 ip 10.1.11.1
active-gateway vlan 11 mac 02:02:00:00:01:00 - B. interface vlan 11
active-gateway ip 10.1.11.1
active-gateway mac 02:02:00:00:01:00 - C. vsx
vrrp group 1 - D. interface lag 254
active-gateway ip 10.1.11.1
active-gateway mac 02:02:00:00:01:00
Answer: B
NEW QUESTION # 58
Examine the configuration performed on newly deployed AOS-CX switches:
After performing this configuration, the administrator notices that the switch ports always remain in the EAP start state. What should the administrator do to fix this problem?
- A. Set the ports to client-mode
- B. Define the server group cppm
- C. Create and assign a local user role to the ports
- D. Enable change of authorization (CoA)
Answer: B
Explanation:
https://community.arubanetworks.com/blogs/esupport1/2020/04/29/downloadable-user-role-configuration-in-aruba-os-cx-with-mac-authentication
NEW QUESTION # 59
When comparing PIM-DM and PIM-SM, which multicast components are only found with PIM-SM in multicast routing? (Choose two.)
- A. IGMP querier
- B. Rendezvous point
- C. Shortest path tree
- D. Designated router
- E. Bootstrap router
Answer: B,C
NEW QUESTION # 60
A network administrator is managing a network that deploys a multicast service. The administrator has multiple streams successfully being routed by PIM-DM in the network. The administrator then adds a new stream with a destination address of 239.0.0.1. However, clients who have not joined the stream are receiving it.
What should the administrator do to fix this problem?
- A. Define the 239.0.0.1 stream on the PIM candidate bootstrap router
- B. Define the 239.0.0.1 stream on the rendezvous point (RP)
- C. Change the destination multicast address to 239.1.1.1
- D. Verify that IGMP is enabled between the switches connecting the multicast source and receivers
Answer: C
NEW QUESTION # 61
An administrator is managing a network comprised of AOS-CX switches deployed at the aggregation layer. The switches are paired in a VSX stack and run the OSPF routing protocol. The administrator is concerned about how long it takes for OSPF to converge when one of the VSX switches has to reboot.
What should the administrator to do speed up the OSPF convergence of the switch that is rebooting?
- A. Change the VSXISL link from an OSPF broadcast link point-to-point.
- B. Define non-backbone areas on the VSX switches as totally stubby areas.
- C. Decrease the VSX initial synchronization timer on the two VSX switches.
- D. Implement graceful restart on the VSX switches and their neighboring OSPF switches.
Answer: D
NEW QUESTION # 62
Examine the following AOS-CX switch configuration:
Which statement correctly describes what is allowed for traffic entering interface 1/1/3?
- A. IP traffic from 10 1 12 0/24 is allowed to access 172.0.1.0/23.
- B. IP traffic from 10 011 0/24 is allowed to access 10.112.0/24.
- C. IP traffic from 10 1 110/24 is allowed to access 10.1.110.0/24.
- D. Traffic from 10 0 12 0/24 will generate a log record when accessing 10.0.11.0/24.
Answer: B
NEW QUESTION # 63
An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as primary and secondary. The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.
What would cause this problem?
- A. The VSX LAG hash does not match the remote peer
- B. The VSX LAG interfaces are in layer-3 mode
- C. Local optimization was not enabled on the VSX LAG
- D. LACP was enabled in active mode on the VSX LAG
Answer: A
NEW QUESTION # 64
What is correct regarding multicasting and AOS-CX switches?
- A. IGMP-enabled AOS-CX switches flood unknown multicast destinations
- B. IGMP query functions are enabled, by default, on Layer-2 VLAN interfaces
- C. IGMP snooping is enabled, by default, on Layer-3 VLAN interfaces
- D. IGMP snooping is disabled, by default, on Layer-2 VLAN interfaces
Answer: A
NEW QUESTION # 65
A network administrator is implementing a configuration plan in NetEdit The administrator used NetEdit to push the configuration plan to the switch. Which option in the NetEdit planning section should the administrator select to save the configuration running on the switch to the startup-config?
- A. VALIDATE
- B. EDIT
- C. DEPLOY
- D. COMMIT
Answer: D
NEW QUESTION # 66
The AOS-CX mobile app allows a network engineer or technician to perform which tasks? (Choose two.)
- A. Schedule an operating system upgrade.
- B. Create a stack of AOS-CX switches.
- C. Securely access the switch using SSH.
- D. Transfer files between the switch and your mobile device.
- E. Use NetEdit to manage switch configuration.
Answer: B,D
Explanation:
ACSP Study Guide Page 66 - Key Features (Transfer files between the switch and your mobile device)
NEW QUESTION # 67
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. User-based tunneling (UBT)
- B. OSPF route maps using the "set metric" command
- C. Policy-based routing (PBR)
- D. Classifier policies
Answer: C
NEW QUESTION # 68
A company has recently purchased a ClearPass AAA solution. Their network consists of AOS-CX switches at the access layer. The company is implementing a rollout of IoT devices for smart building management to control the lighting and HVAC systems. The network administrator is concerned about allowing secure access to these devices since they only support MAC-Auth.
Which ClearPass feature should the administrator leverage to help determine that MAC address spoofing is not occurring for this group of devices?
- A. User-based tunneling
- B. Device fingerprinting
- C. Downloadable user roles
- D. RADIUS change of authorization
Answer: B
NEW QUESTION # 69
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. User-based tunneling (UBT)
- B. OSPF route maps using the "set metric" command
- C. Policy-based routing (PBR)
- D. Classifier policies
Answer: C
NEW QUESTION # 70
An administrator in a company of 349 users has a pair of AOS-CX switches with connections to external networks. Both switches are configured for OSPF. The administrator wants to import external routes on both switches, but assigns different seed metrics to the routes, as well as imports them as external type-1 routes.
What is the best way for the administrator to accomplish this?
- A. Define a class and policy map with the correct route type and metrics
- B. Define the route type and metrics in the OSPF process
- C. Create a route map with the correct route type and metrics
- D. Create a classifier policy with the correct route type and metrics
Answer: C
NEW QUESTION # 71
A network engineer for a company with 896 users across a multi-building campus wants to gather statistics on an important switch uplink and create actions based on issues that occur on the uplink. How often does an NAE agent gather information from the current state database in regard to the uplink interfaces?
- A. Once every 30 seconds
- B. Once every 60 seconds
- C. Once every 5 seconds
- D. Once every 1 second
Answer: C
NEW QUESTION # 72
What is correct regarding the configuration of ACLs on AOS-CX switches?
- A. Wildcard masks are used to match on a range of IP addresses.
- B. Statements with the log keyword are always processed by the switch CPU.
- C. Numbers 100 through 199 and 2000 through 2999 are used when creating extended ACLs.
- D. Standard ACLs are used to match on routes when performing route distribution.
Answer: A
NEW QUESTION # 73
......
Best way to practice test for HP HPE6-A73: https://www.real4dumps.com/HPE6-A73_examcollection.html
HPE6-A73 Dump Ready - Exam Questions and Answers: https://drive.google.com/open?id=1q8PTxViDhUGETuuXsEbuFvkVabE2Woc7
