Verified NSE7_SDW-6.4 dumps Q&As - 2023 Latest NSE7_SDW-6.4 Download
Updated 100% Cover Real NSE7_SDW-6.4 Exam Questions - 100% Pass Guarantee
Fortinet NSE7_SDW-6.4 (Fortinet NSE 7 - SD-WAN 6.4) exam is designed to validate the knowledge and skills required to manage and operate Fortinet SD-WAN solutions. Fortinet SD-WAN is a software-defined wide area network (SD-WAN) solution that provides secure and reliable connectivity for distributed enterprises. NSE7_SDW-6.4 exam is aimed at network and security professionals who are responsible for designing, implementing, and managing Fortinet SD-WAN solutions.
NEW QUESTION # 14
Refer to exhibits.
Exhibit A shows the source NAT global setting and exhibit B shows the routing table on FortiGate.
Based on the exhibits, which two statements about increasing the port2 interface priority to 20 are true? (Choose two.)
- A. All the existing sessions will continue to use port2, and new sessions will use port1.
- B. All the existing sessions using SNAT will be flushed and routed through port1.
- C. All the existing sessions that do not use SNAT will be flushed and routed through port1.
- D. All the existing sessions will be blocked from using port1 and port2.
Answer: B,C
NEW QUESTION # 15
In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two )
- A. The FIB lookup resolved interface was the SD-WAN member interface
- B. An absolute SD-WAN rule was defined and matched traffic
- C. Traffic has matched none of the FortiGate policy routes
- D. Matched traffic failed RPF and was caught by the rule.
Answer: B,C
NEW QUESTION # 16
Which two tasks about using central VPN management are true? (Choose two.)
- A. You configure VPN communities to define common IPsec settings shared by all VPN gateways.
- B. You must enable VPN zones for SD-WAN deployments.
- C. You can configure full mesh, star, and dial-up VPN topologies.
- D. FortiManager installs VPN settings on both managed and external gateways.
Answer: A,C
NEW QUESTION # 17
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the source NAT global setting and exhibit B shows the routing table on FortiGate Based on the exhibits, which two statements about increasing the port2 interface priority to 20 are true? (Choose two )
- A. All the existing sessions will continue to use port2 and new sessions will use port1
- B. All the existing sessions using SNAT will start using port1 as the outgoing interface instead of port2.
- C. All the existing sessions will be blocked from using port1 and port2
- D. All the existing sessions with no SNAT will start using port1 as the outgoing interface instead of port2
Answer: B,D
NEW QUESTION # 18
What are two roles that SD-WAN orchestrator plays when it works with FortiManager? (Choose two )
- A. It acts as an application that is released and signed by Fortinet to run as a part of management extensions on FortiManager.
- B. It acts as a hub FortiGate with an SD-WAN interface enabled and managed along with other FortiGate devices by FortiManager.
- C. It acts as a standalone device to assist FortiManager to manage SD-WAN interfaces on the managed FortiGate devices.
- D. It configures and monitors SD-WAN networks on FortiGate devices that are managed by FortiManager.
Answer: A,C
NEW QUESTION # 19
Which statement about using BGP routes in SD-WAN is true?
- A. Learned routes can be used as dynamic destinations in SD-WAN rules
- B. Dynamic routing protocols can be used only with non-encrypted traffic
- C. VPN topologies must be form using only BGP dynamic routing with SD-WAN
- D. Adding static routes must be enabled on all ADVPN interfaces.
Answer: C
NEW QUESTION # 20
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the traffic shaping policy and exhibit B show: the firewall policy FortiGate is not performing traffic shaping as expected basi on the policies shown in the exhibits.
To correct this traffic shaping issue on FortiGate, what configuration change must be made on which policy?
- A. The URL category must be specified on the traffic shaping policy
- B. The web filter profile must be enabled on the firewall policy
- C. The application control profile must be enabled on the firewall policy.
- D. The shaper mode must be applied per-IP shaper on the traffic shaping policy
Answer: B
NEW QUESTION # 21
Refer to the exhibits.
Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SD-WAN member and the static routes configuration.
If port2 is detected dead by FortiGate, which expected behavior is correct?
- A. Port2 becomes alive after one successful probe is detected.
- B. The SD-WAN interface becomes disabled and port1 becomes the WAN interface.
- C. Subnets 10.0.20.0/23 and 172.20.0.0/16 are reachable only through port1.
- D. Dead members require manual administrator access to bring them back alive.
Answer: C
NEW QUESTION # 22
Refer to the exhibits.
Exhibit A:
Exhibit B:
Exhibit A shows the SD-WAN rules and exhibit B shows the traffic logs. The SD-WAN traffic logs reflect how FortiGate distributes traffic.
Based on the exhibits, what are two expected behaviors when FortiGate processes SD-WAN traffic? (Choose two.)
- A. The implicit rule overrides all other rules because parameters widely cover sources and destinations.
- B. The Vimeo SD-WAN rule steers Vimeo application traffic among all SD-WAN member interfaces.
- C. The first Vimeo session may not match the Vimeo SD-WAN rule because the session is used for the application learning phase.
- D. SD-WAN rules are evaluated in the same way as firewall policies: from top to bottom.
Answer: C,D
NEW QUESTION # 23
Which three parameters are available to configure SD-WAN rules? (Choose three.)
- A. Type of physical link connection
- B. URL categories
- C. Application signatures
- D. Internet service database (ISDB) address object
- E. Source and destination IP address
Answer: B,D,E
NEW QUESTION # 24
What would best describe the SD-WAN traffic shaping mode that bases itself on a percentage of available bandwidth?
- A. Per-IP shaping mode
- B. Interface-based shaping mode
- C. Reverse policy shaping mode
- D. Shared policy shaping mode
Answer: D
NEW QUESTION # 25
Refer to the exhibit.
FortiGate has multiple dial-up VPN interfaces incoming on port1 that match only FIRST_VPN.
Which two configuration changes must be made to both IPsec VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two.)
- A. Configure the IKE mode to be aggressive mode.
- B. Use unique Diffie Hellman groups on each VPN interface.
- C. Specify a unique peer ID for each dial-up VPN interface.
- D. Use different proposals are used between the interfaces.
Answer: B,D
NEW QUESTION # 26
Which diagnostic command you can use to show interface-specific SLA logs for the last 10 minutes?
- A. diagnose sys virtual-wan-link sla-log
- B. diagnose sys virtual-wan-link log
- C. diagnose sys virtual-wan-link health-check
- D. diagnose sys virtual-wan-link intf-sla-log
Answer: A
Explanation:
Explanation/Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/943037/sla-logging
NEW QUESTION # 27
Refer to exhibits.
Exhibit B.
Exhibit A shows the firewall policy and exhibit B shows the traffic shaping policy.
The traffic shaping policy is being applied to all outbound traffic however inbound traffic is not being evaluated by the shaping policy Based on the exhibit, what configuration change must be made in which policy so that traffic shaping can be applied to inbound traffic'?
- A. The guaranteed-10mbps option must be selected as the reverse shaper option.
- B. The guaranteed-10mbps option must be selected as the per-IP shaper option
- C. A new firewall policy must be created and SD-WAN must be selected as the incoming interface.
- D. The reverse shaper option must be enabled and a traffic shaper must be selected
Answer: A
NEW QUESTION # 28
When attempting to establish an IPsec tunnel to FortiGate, all remote users match the FIRST_VPN IPsec VPN. This includes remote users that want to connect to the SECOND_VPN IPsec VPN. Which two configuration changes must you make on both IPsec VPNs so that remote users can connect to their intended IPsec VPN? (Choose two.)
- A. Configure different proposals.
- B. Change the IKE mode to aggressive.
- C. Configure a unique peer ID.
- D. Configure different Diffie Hellman groups.
Answer: B,C
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=10114
NEW QUESTION # 29
Which three performance SLA protocols are available on the FortiGate CLI only? (Choose three.)
- A. udp-echo
- B. twamp
- C. tcp-echo
- D. icmp
- E. smtp
Answer: A,B,C
Explanation:
Command output from a fortigate:
FW-01 (test-health-check) # set protocol
ping Use PING to test the link with the server.
tcp-echo Use TCP echo to test the link with the server.
udp-echo Use UDP echo to test the link with the server.
http Use HTTP-GET to test the link with the server.
twamp Use TWAMP to test the link with the server.
dns Use DNS query to test the link with the server.
tcp-connect Use a full TCP connection to test the link with the server.
ftp Use FTP to test the link with the server.
NEW QUESTION # 30
......
Fortinet NSE7_SDW-6.4 (Fortinet NSE 7 - SD-WAN 6.4) is an advanced-level certification exam offered by Fortinet. NSE7_SDW-6.4 exam is designed to test the knowledge and skills of network and security professionals in designing, implementing, and managing secure software-defined wide area networks (SD-WAN) using Fortinet products and technologies. Fortinet NSE 7 - SD-WAN 6.4 certification is intended for individuals who want to validate their expertise in SD-WAN technologies and Fortinet solutions.
Use Real Dumps - 100% Free NSE7_SDW-6.4 Exam Dumps: https://www.real4dumps.com/NSE7_SDW-6.4_examcollection.html
