Latest Feb 16, 2024 Real SK0-005 Exam Dumps Questions Valid SK0-005 Dumps PDF [Q152-Q175]

Share

Latest Feb 16, 2024 Real SK0-005 Exam Dumps Questions Valid SK0-005 Dumps PDF

CompTIA SK0-005 Exam Dumps - PDF Questions and Testing Engine


Achieving the CompTIA Server+ certification demonstrates a professional's ability to manage and maintain server hardware and software, troubleshoot server issues, and implement security measures to protect against cyber threats. It is a valuable credential for IT professionals who want to advance their careers and increase their earning potential. Additionally, the certification is recognized globally and is sought after by employers in various industries, including healthcare, finance, and government agencies.


The SK0-005 exam measures the candidate's proficiency in server architecture, storage, security, networking, disaster recovery, and troubleshooting. SK0-005 exam comprises 90 multiple-choice and performance-based questions that test the candidate's ability to install, configure, and manage server hardware and software. SK0-005 exam is available in English, Japanese, and Portuguese languages, and candidates have 90 minutes to complete it. The CompTIA Server+ certification is an industry-recognized credential that demonstrates the candidate's expertise in server technology and is valued by employers across various industries.

 

NEW QUESTION # 152
A server technician is installing a new server OS on legacy server hardware. Which of the following should the technician do FIRST to ensure the OS will work as intended?

  • A. Migrate the physical server to a virtual server.
  • B. Make sure the case and the fans are free from dust to ensure proper cooling.
  • C. Low-level format the hard drives to ensure there is no old data remaining.
  • D. Consult the HCL to ensure everything is supported.

Answer: D

Explanation:
The first thing that the technician should do before installing a new server OS on legacy server hardware is to consult the HCL (Hardware Compatibility List) to ensure everything is supported. The HCL is a list of hardware devices and components that are tested and certified to work with a specific OS or software product. The HCL helps to avoid compatibility issues and performance problems that may arise from using unsupported or incompatible hardware. Migrating the physical server to a virtual server may be a good option to improve scalability and flexibility, but it requires additional hardware and software resources and may not be feasible for legacy server hardware. Low-level formatting the hard drives may be a good practice to erase any old data and prepare the drives for a new OS installation, but it does not guarantee that the hardware will work with the new OS. Making sure the case and the fans are free from dust may be a good practice to ensure proper cooling and prevent overheating, but it does not guarantee that the hardware will work with the new OS. Reference: https://www.howtogeek.com/190014/virtualization-basics-understanding-techniques-and-fundamentals/ https://www.howtogeek.com/173353/how-to-low-level-format-or-write-zeros-to-a-hard-drive/ https://www.howtogeek.com/303282/how-to-manage-your-pcs-fans-for-optimal-airflow-and-cooling/


NEW QUESTION # 153
An administrator has been asked to increase the storage capacity of a stand-alone file server but no further expansion slots are available. Which of the following would be the FASTEST solution to implement with no downtime?

  • A. Replace the current drives with higher-capacity disks.
  • B. Implement FCoE for more storage capacity.
  • C. Configure a RAID array.
  • D. Connect the server to a SAN

Answer: D

Explanation:
Explanation
A SAN (Storage Area Network) is a network of storage devices that can provide shared storage capacity to multiple servers. By connecting the server to a SAN, the administrator can increase the storage capacity of the server without adding any internal disks or expansion cards. This solution can be implemented quickly and without any downtime. Verified References: [What is a SAN and how does it differ from NAS?]


NEW QUESTION # 154
Which of the following access control methodologies can be described BEST as allowing a user the least access based on the jobs the user needs to perform?

  • A. Location-based
  • B. Role-based
  • C. Rule-based
  • D. Scope-based

Answer: B


NEW QUESTION # 155
A security analyst completed a port scan of the corporate production-server network. Results of the scan were then provided to a systems administrator for immediate action. The following table represents the requested changes:

The systems administrator created local firewall rules to block the ports indicated above. Immediately, the service desk began receiving calls about the internet being down. The systems administrator then reversed the changes, and the internet became available again. Which of the following ports on DNSSrv must remain open when the firewall rules are reapplied?

  • A. 0
  • B. 1
  • C. 2
  • D. 3
  • E. 4

Answer: E

Explanation:
Explanation
Port 53 is the standard port for DNS (Domain Name System) queries and responses. DNS is a service that translates domain names (such as www.example.com) into IP addresses (such as 192.0.2.1) and vice versa. DNS is essential for internet connectivity, as it allows users and applications to access websites and other online resources by using human-readable names instead of numerical addresses1.
The DNSSrv server is a DNS server that provides name resolution for the corporate network. If port 53 is blocked on this server, it will not be able to communicate with other DNS servers or clients, and the name resolution will fail. This will prevent users from accessing any websites or online services that rely on domain names, such as web browsers, email clients, or cloud applications. Therefore, port 53 must remain open on DNSSrv to allow DNS traffic to flow.


NEW QUESTION # 156
When grid power goes out, all servers in a rack lose power immediately. The server administrator confirms the servers have dual power supplies, which are connected to separate PDUs. Each of the PDUs is connected to a different UPS. Which of the following is the MOST likely cause of the problem?

  • A. The power circuit was tripped on both PDUs.
  • B. Both of the UPS devices were set for the wrong voltage.
  • C. The UPS batteries were discharged.
  • D. The server power supplies failed during the outage.

Answer: A


NEW QUESTION # 157
An administrator needs three distinct security zones in a company's network. Which of the following is the administrator MOST likely to implement?

  • A. Host-based firewalls
  • B. A Layer 3 firewall
  • C. A circuit-based firewall
  • D. A web application firewall

Answer: B


NEW QUESTION # 158
Which of the following BEST describes the metric that is used to measure server downtime?

  • A. SLA
  • B. BIA
  • C. RPO
  • D. MTTR

Answer: D


NEW QUESTION # 159
An administrator is working locally in a data center with multiple server racks. Which of the following is the best low-cost option to connect to any server while on site?

  • A. IPKVM
  • B. IPMI
  • C. Remote console access
  • D. Crash cart

Answer: D

Explanation:
A crash cart is the best low-cost option to connect to any server while on site in a data center with multiple server racks. A crash cart is a mobile unit that contains a monitor, a keyboard, a mouse, and cables that can be plugged into any server for direct access and control. A crash cart can be used for troubleshooting, maintenance, or configuration of servers without requiring remote access or network connectivity. A crash cart is also easy to move around and store in a data center. Reference: [CompTIA Server+ Certification Exam Objectives], Domain 2.0: Hardware, Objective 2.4: Given a scenario involving server management issues (e.g., remote access), troubleshoot using appropriate tools.


NEW QUESTION # 160
A junior administrator needs to configure a single RAID 5 volume out of four 200GB drives attached to the server using the maximum possible capacity. Upon completion, the server reports that all drives were used, and the approximate volume size is 400GB. Which of the following BEST describes the result of this configuration?

  • A. RAID 10 was configured by mistake.
  • B. RAID 5 was configured properly.
  • C. JBOD was configured by mistake.
  • D. RAID 0 was configured by mistake.

Answer: B

Explanation:
Explanation
The output of the configuration shows that RAID 5 was configured properly using four 200GB drives. The approximate volume size of 400GB is correct, since RAID 5 uses one disk for parity and the rest for data.
Therefore, the usable storage capacity is three-fourths of the total capacity, which is 600GB out of 800GB.
The other RAID levels given would result in different volume sizes: RAID 0 would result in 800GB, RAID 1 would result in 200GB, and JBOD would result in an error since it does not support multiple drives in a single volume. References: https://en.wikipedia.org/wiki/Standard_RAID_levels#RAID_5


NEW QUESTION # 161
A systems administrator is setting up a server farm for a new company. The company has a public range of IP addresses and uses the addresses internally. Which of the following IP addresses best fits this scenario?

  • A. 127.0.0.1
  • B. 216,176,128.10
  • C. 10.3.7.27
  • D. 192.168.7.1

Answer: B

Explanation:
Explanation
The IP address that best fits this scenario is 216.176.128.10. This is a public IP address that belongs to a range of addresses that are assigned and registered by an Internet service provider (ISP) and can be accessed from anywhere on the Internet. The company has a public range of IP addresses and uses them internally, which means that they do not use private IP addresses or network address translation (NAT) to communicate within their network.
References: CompTIA Server+ SK0-005 Certification Study Guide, Chapter 2, Lesson 2.2, Objective 2.2


NEW QUESTION # 162
When configuring networking on a VM, which of the following methods would allow multiple VMs to share the same host IP address?

  • A. Bridged
  • B. NAT
  • C. Host only
  • D. vSwitch

Answer: B

Explanation:

https://www.virtualbox.org/manual/ch06.html


NEW QUESTION # 163
Which of the following should be configured in pairs on a server to provide network redundancy?

  • A. NIC
  • B. MRU
  • C. SCP
  • D. CPU
  • E. DLP

Answer: A

Explanation:
NIC stands for network interface card, which is a hardware component that allows a server to connect to a network. Configuring NICs in pairs on a server would provide network redundancy, meaning that if one NIC fails, the other one can take over and maintain network connectivity. The other options are not related to network redundancy.


NEW QUESTION # 164
Which of the following DR testing scenarios is described as verbally walking through each step of the DR plan in the context of a meeting?

  • A. Live failover
  • B. Asynchronous
  • C. Tabletop
  • D. Simulated failover

Answer: C

Explanation:
Explanation
The DR testing scenario that is described as verbally walking through each step of the DR plan in the context of a meeting is tabletop. A tabletop test is a type of disaster recovery (DR) test that involves discussing and reviewing the DR plan with key stakeholders and participants in a simulated scenario. A tabletop test does not involve any actual execution of the DR plan or any disruption of the normal operations. A tabletop test can help identify gaps, issues, or inconsistencies in the DR plan and improve communication and coordination among the DR team members.


NEW QUESTION # 165
A systems administrator is preparing to install two servers in a single rack. The administrator is concerned that having both servers in one rack will increase the chance of power issues due to the increased load. Which of the following should the administrator implement FIRST to address the issue?

  • A. An uninterruptible power supply
  • B. Separate circuits
  • C. Increased PDU capacity
  • D. Redundant power supplies

Answer: C


NEW QUESTION # 166
A systems administrator is setting up a new server that will be used as a DHCP server. The administrator installs the OS but is then unable to log on using Active Directory credentials. The administrator logs on using the local administrator account and verifies the server has the correct IP address, subnet mask, and default gateway. The administrator then gets on another server and can ping the new server. Which of the following is causing the issue?

  • A. The server is experiencing a downstream failure
  • B. The local hosts file is blank
  • C. The server is not joined to the domain
  • D. Port 443 is not open on the firewall

Answer: C


NEW QUESTION # 167
A technician is checking a server rack. Upon entering the room, the technician notices the tans on a particular server in the rack are running at high speeds. This is the only server in the rack that is experiencing this behavior. The ambient temperature in the room appears to be normal. Which of the following is the MOST likely reason why the fans in that server are operating at full speed?

  • A. A fan failure has occurred, and the other fans have increased speed to compensate.
  • B. The server is utilizing more memory than the other servers, so it has increased the fans to compensate.
  • C. The server is In the process of shutting down, so fan speed operations have been defaulted to high.
  • D. An incorrect fan size was inserted into the server, and the server has had to Increase the fan speed to compensate.

Answer: A


NEW QUESTION # 168
A server technician notices several of the servers in a data center are making loud noises. The servers are still working correctly, and no indicator lights show any issues. Which of the following should the technician do first to ensure the issues are corrected and the servers remain online?

  • A. Replace the fans.
  • B. Replace the drives.
  • C. Upgrade the firmware.
  • D. Establish a remote connection to the server.

Answer: B

Explanation:
The loud noises from the servers are most likely caused by failing hard disk drives, which can produce clicking or grinding sounds. Replacing the drives with new ones can prevent data loss and downtime. Replacing the drives can be done without shutting down the server if they are hot-swappable, which means they can be removed and inserted while the server is running. Reference: CompTIA Server+ Certification Exam Objectives, Domain 3.0: Storage, Objective 3.1: Given a scenario, install, deploy, configure and update physical storage devices.


NEW QUESTION # 169
A USB drive has been purchased to move files between Windows, *nix, and Macintosh servers.
Which of the following filesystems is the BEST choice to ensure the drive can read and be written to by all of the servers?

  • A. UFS
  • B. FAT32
  • C. NTFS
  • D. ext2

Answer: B


NEW QUESTION # 170
Which of the following server types would benefit MOST from the use of a load balancer?

  • A. DNS server
  • B. File server
  • C. DHCP server
  • D. Web server

Answer: D

Explanation:
Reference:
https://www.dnsstuff.com/what-is-server-load-balancing


NEW QUESTION # 171
Which of the following tools will analyze network logs in real time to report on suspicious log events?

  • A. Syslog
  • B. SIEM
  • C. DLP
  • D. HIPS

Answer: B

Explanation:
SIEM is the tool that will analyze network logs in real time to report on suspicious log events. SIEM stands for Security Information and Event Management, which is a software solution that collects, analyzes, and correlates log data from various sources, such as servers, firewalls, routers, antivirus software, etc. SIEM can detect anomalies, patterns, trends, and threats in the log data and generate alerts or reports for security monitoring and incident response. SIEM can also provide historical analysis and compliance reporting for audit purposes.
Reference:
https://www.manageengine.com/products/eventlog/syslog-server.html


NEW QUESTION # 172
A systems administrator deployed a new web proxy server onto the network. The proxy server has two interfaces: the first is connected to an internal corporate firewall, and the second is connected to an internet-facing firewall. Many users at the company are reporting they are unable to access the Internet since the new proxy was introduced. Analyze the network diagram and the proxy server's host routing table to resolve the Internet connectivity issues.
INSTRUCTIONS
Perform the following steps:
1. Click on the proxy server to display its routing table.
2. Modify the appropriate route entries to resolve the Internet connectivity issue.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

Answer:

Explanation:


NEW QUESTION # 173
Which of the following refers to the requirements that dictate when to delete data backups?

  • A. Retention policies.
  • B. Life-cycle management
  • C. Off-site storage
  • D. Cloud security impact

Answer: A

Explanation:
Retention policies are the guidelines that dictate when to delete data backups based on operational or compliance needs. They specify how long, how, where, and in what format the data backups are stored, and who has authority over them. The other options are not directly related to the deletion of data backups.
https://backup.ninja/news/Database-Backups-101-Backup-Retention-Policy-Considerations


NEW QUESTION # 174
A systems administrator recently upgraded the memory in a server, and now the server does not turn on, and nothing is displayed on the screen.
Which of the following is the next step the administrator should take to diagnose the error without opening the machine?

  • A. Perform a cold reboot.
  • B. Check the monitor connection.
  • C. Listen for POST code beeps.
  • D. Call technical support.

Answer: C

Explanation:
Explanation
A power-on self-test (POST) is a diagnostic process that runs when a server is turned on to check the basic functionality of the hardware components and report any errors or faults. A POST code is a series of beeps or flashes that indicate the status of the POST process and identify any problems that prevent the server from booting up. A POST code can be heard through a speaker or seen on a display attached to the server motherboard. A POST code is useful for diagnosing errors without opening the machine or using any software tools.
References: CompTIA Server+ SK0-005 Certification Study Guide, Chapter 5, Lesson 5.1, Objective 5.1


NEW QUESTION # 175
......

Reliable CompTIA Server+ SK0-005 Dumps PDF Feb 16, 2024 Recently Updated Questions: https://www.real4dumps.com/SK0-005_examcollection.html

Latest SK0-005 Exam Dumps for Pass Guaranteed: https://drive.google.com/open?id=16zr5SXYMvChdjUKdIgZJzKtesJzWCMQX