Latest 156-215.81 Actual Free Exam Updated 402 Questions
Online Questions - Valid Practice 156-215.81 Exam Dumps Test Questions
The CCSA R81 exam is an important certification for network security professionals who want to demonstrate their expertise in Check Point's security technologies. It is a globally recognized certification that can help individuals advance their careers in network security. 156-215.81 exam is designed for network administrators, security engineers, and other IT professionals who work with Check Point's security technologies and want to validate their skills and knowledge. Passing 156-215.81 exam requires a deep understanding of Check Point's security architecture and technologies, as well as best practices for deploying and managing these solutions.
NEW QUESTION # 32
Fill in the blank: In Security Gateways R75 and above, SIC uses ______________ for encryption.
- A. AES-256
- B. AES-128
- C. 3DES
- D. DES
Answer: B
NEW QUESTION # 33
Which method below is NOT one of the ways to communicate using the Management API's?
- A. Typing API commands from a dialog box inside the SmartConsole GUI application
- B. Typing API commands using Gaia's secure shell (clash)19+
- C. Sending API commands over an http connection using web-services
- D. Typing API commands using the "mgmt_cli" command
Answer: C
NEW QUESTION # 34
After trust has been established between the Check Point components, what is TRUE about name and IP-address changes?
- A. The Security Management Server name cannot be changed in SmartConsole without re-establishing trust
- B. Security Gateway IP-address cannot be changed without re-establishing the trust
- C. The Security Management Server IP-address cannot be changed without re-establishing the trust
- D. The Security Gateway name cannot be changed in command line without re-establishing trust
Answer: B
Explanation:
Explanation
The answer is A because changing the Security Gateway IP-address requires re-establishing the trust with the Security Management Server by initializing the Secure Internal Communication (SIC). Changing the Security Gateway name in command line or changing the Security Management Server name or IP-address in SmartConsole does not require re-establishing the trust, but it may require updating the topology and pushing the policy.References: [Check Point R81 Security Management Administration Guide], [Check Point R81 Security Gateway Administration Guide]
NEW QUESTION # 35
To view statistics on detected threats, which Threat Tool would an administrator use?
- A. ThreatWiki
- B. Protections
- C. IPS Protections
- D. Profiles
Answer: A
Explanation:
Explanation
ThreatWiki is a web-based tool that provides statistics on detected threats, such as attack types, sources, destinations, and severity. It also allows the administrator to search for specific threats and view their details and mitigation methods. The other options are not tools for viewing statistics on detected threats. References:
[ThreatWiki], [ThreatWiki - Threat Emulation]
NEW QUESTION # 36
Which of the following methods can be used to update the trusted log server regarding the policy and configuration changes performed on the Security Management Server?
- A. Install Policy
- B. Save session
- C. Save Policy
- D. Install Database
Answer: A
NEW QUESTION # 37
Which of the following is NOT a valid application navigation tab in the R80 SmartConsole?
- A. Security Policies
- B. Gateway and Servers
- C. Logs and Monitor
- D. Manage and Command Line
Answer: D
Explanation:
NEW QUESTION # 38
What two ordered layers make up the Access Control Policy Layer?
- A. URL Filtering and Network
- B. Network and Threat Prevention
- C. Network and Application Control
- D. Application Control and URL Filtering
Answer: C
NEW QUESTION # 39
Which of the completed statements is NOT true? The WebUI can be used to manage Operating System user accounts and
- A. assign user rights to their home directory in the Security Management Server.
- B. add users to your Gaia system.
- C. edit the home directory of the user.
- D. assign privileges to users.
Answer: A
NEW QUESTION # 40
Fill in the blank: Once a certificate is revoked from the Security GateWay by the Security Management Server, the certificate information is _______.
- A. Sent to the Internal Certificate Authority.
- B. Stored on the Security Management Server.
- C. Stored on the Certificate Revocation List.
- D. Sent to the Security Administrator.
Answer: C
Explanation:
Explanation
Once a certificate is revoked from the Security Gateway by the Security Management Server, the certificate information is stored on the Certificate Revocation List (CRL)1, p. 47. The CRL is a list of certificates that have been revoked before their expiration date4. References: Check Point CCSA - R81: Practice Test & Explanation, Free Check Point CCSA Sample Questions and Study Guide
NEW QUESTION # 41
You noticed that CPU cores on the Security Gateway are usually 100% utilized and many packets were dropped. You don't have a budget to perform a hardware upgrade at this time. To optimize drops you decide to use Priority Queues and fully enable Dynamic Dispatcher. How can you enable them?
- A. fw ctl multik dynamic_dispatching on
- B. fw ctl multik set_mode 9
- C. fw ctl multik dynamic_dispatching set_mode 9
- D. fw ctl miltik pq enable
Answer: B
Explanation:
Explanation
To optimize drops, you can use Priority Queues and fully enable Dynamic Dispatcher on the Security Gateway23. Priority Queues are a mechanism that prioritizes part of the traffic when the Security Gateway is stressed and needs to drop packets. Dynamic Dispatcher is a feature that dynamically assigns new connections to a CoreXL FW instance based on the utilization of CPU cores. To enable both features, you need to run the command fw ctl multik set_mode 9 on the Security Gateway4. Therefore, the correct answer is C. fw ctl multik set_mode 9. References: CoreXL Dynamic Dispatcher - Check Point Software, Firewall Priority Queues in R80.x / R81.x - Check Point Software, Separate Config for Dynamic Dispatcher and Priority Queues
NEW QUESTION # 42
Which of the following is NOT a valid configuration screen of an Access Role Object?
- A. Users
- B. Machines
- C. Time
- D. Networks
Answer: C
NEW QUESTION # 43
There are two R77.30 Security Gateways in the Firewall Cluster. They are named FW_A and FW_B. The cluster is configured to work as HA (High availability) with default cluster configuration. FW_A is configured to have higher priority than FW_B. FW_A was active and processing the traffic in the morning. FW_B was standby. Around 1100 am, its interfaces went down and this caused a failover. FW_B became active. After an hour, FW_A's interface issues were resolved and it became operational.
When it re-joins the cluster, will it become active automatically?
- A. No, since "maintain current active cluster member" option is enabled by default on the Global Properties
- B. Yes, since "Switch to higher priority cluster member" option on the cluster object properties is enabled by default
- C. No, since "maintain current active cluster member" option on the cluster object properties is enabled by default
- D. Yes, since "Switch to higher priority cluster member" option is enabled by default on the Global Properties
Answer: C
NEW QUESTION # 44
Which of the following cannot be configured in an Access Role Object?
- A. Users
- B. Machines
- C. Time
- D. Networks
Answer: C
Explanation:
Access Role objects includes one or more of these objects:
Networks.
Users and user groups.
Computers and computer groups.
Remote Access Clients.
https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_IdentityAwareness_AdminGuide/Topics-IDAG/Introduction-Access-Role-Objects.htm
NEW QUESTION # 45
Which of the following is NOT an option for internal network definition of Anti-spoofing?
- A. Specific - derived from a selected object
- B. Network defined by the interface IP and Net Mask
- C. Not-defined
- D. Route-based - derived from gateway routing table
Answer: D
NEW QUESTION # 46
Fill in the blank: With the User Directory Software Blade, you can create user definitions on a(n) ___________ Server.
- A. SMTP
- B. SecurID
- C. NT domain
- D. LDAP
Answer: D
Explanation:
https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_SecurityManagement_AdminGuide/Topics-SECMG/LDAP-and-User-Directory.htm
NEW QUESTION # 47
......
156-215.81 Exam PDF [2024] Tests Free Updated Today with Correct 402 Questions: https://www.real4dumps.com/156-215.81_examcollection.html
100% Real 156-215.81 dumps - Brilliant 156-215.81 Exam Questions PDF: https://drive.google.com/open?id=1rbXrsjhtQzPVui2n7F0om_t8GF1_vQNc
